Mantic 9000 Series Triple Disc Clutch - Cerametallic - 2014+ Chevy Corvette C7 & Z06 - M931207
Mantic Clutch m931207
*some restrictions apply
- Part Number:
- m931207
- SKU:
- M931207
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
If your Corvette C7 makes serious power, this is the clutch kit you need. All billet construction means its designed for heavy duty use and will not flex like the typical stamped steel kits. The Mantic 9000 Triple Disc Clutch is a direct replacement for the stock C7 clutch and includes all necessary hardware for installation.
Application:
2014, 2015, 2016, 2017, 2018 Corvette C7 Stingray, Z06
Ease of drivability makes our triple disc popular for severe applications. Pedal effort remains low with approximately 12-15% increase over the OE clutch pedal feel. These kits offer up to 1515 ft-lbs of torque capacity at the crank, roughly 1250-1285 ft-lbs at the wheels.
The increased capacity of the triple disc configuration transfers more power to the wheels. The heavy duty ceremetallic friction material allows better heat dissipation for repeated launches on the street or strip. NOTE: Capacity will vary with use and type of power adder being utilized ( NA vs Supercharger vs Nitrous vs Turbo )
Features:
- SFI Approved
- All Billet Construction - No Flex at High RPM
- Light Pedal Feel, High Torque Capacity
- All in One Complete Kit
- Lightened Flywheel
- Completely Rebuildable
This Mantic C7 Corvette clutch kit uses our unique sprung center with cushioned triple discs. The Mantic C7 clutch uses three 9" diameter discs that greatly reduces the Moment of Inertia (MOI) for a seamless transition of power between gears. More power to the ground as well as quicker more precise shifts is the huge benefit over the stock clutch. The lightweight flywheel allows quicker revs compared to the heavier OE units.
The clutch is modular in construction for ease of service and is completely rebuildable. The red clutch cover and components are machined from billet stock adding strength and durability. With precise machining and proven durability, our Mantic Clutch Kits are SFI approved for street or strip use.
Mantic Part Number: M931207
