Edelbrock 1411 - Carburetor Performer Series 4-Barrel 750 CFM Electric Choke Satin Finish

Edelbrock - 1411

Carburetor - Performer - 4-Barrel - 750 CFM - Square Bore - Electric Choke - Mechanical Secondary - Single Inlet - Satin - Each

Edelbrock Performer Series 750 cfm, Square-Flange, Electric Choke Carburetor (non-EGR)

The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY WITH PERFORMANCE) Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds or other brands of similar design, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Provides excellent fuel economy when used on 454 c.i.d. Chevy and 460 c.i.d. Ford with Performer manifold. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .110, Secondary .107; Metering Rods - .075 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.

• Bolts On And Runs Right Out of The Box
• Dependable Street Performance/Smooth Throttle Response
• Factory Set Float Levels; Adjustments Are Rarely Needed
• 2-Piece Design Means No Gaskets Below The Fuel Level
• Installation And Tuning DVD Included With Every New Carb
• Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
• Incl. Both Timed And Full Vacuum Ports For Ignition Advance
• Designed For Stock To Performer Lever Engines
• Match With A Variety of Manifolds
• Made In The U.S.A.