Edelbrock 1400 - Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish

Edelbrock - 1400

Carburetor - Performer - 4-Barrel - 600 CFM - Square Bore - Electric Choke - Mechanical Secondary - Single Inlet - Satin - Each

Performer Series Carburetor #1400 600 CFM with Electric Choke in Satin Finish (EGR). The #1400 is an emissions legal part when used with 1980 & before non-feedback GM V8s. May require the use of adapter plate #2696. EO D-215-10.

The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1400 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY) Calibrated for maximum fuel economy. Includes timed vacuum ports, EGR and fuel vapor outlet. Not for computer-controlled engines. Comes with the following jets, rods and springs: Metering Jets - Primary .098, Secondary .095; Metering Rods - .073 x .047; Step-Up Spring - orange (5 Hg). Includes carburetors studs and hardware. EGR adapter #1476 sold separately. Use Carb Studs #8008 or #8024 if needed.

• Bolts On And Runs Right Out of The Box
• Dependable Street Performance/Smooth Throttle Response
• Factory Set Float Levels; Adjustments Are Rarely Needed
• 2-Piece Design Means No Gaskets Below The Fuel Level
• Installation And Tuning DVD Included With Every New Carb
• Change Jets/Adjust Floats/Replace Needles-Seats w/o Fuel Drain
• Incl. Both Timed And Full Vacuum Ports For Ignition Advance
• EGR And Fuel Vapor Outlet
• Calibrated for Maximum Fuel Economy
• Made In The U.S.A.