Mishimoto MMRT-F2D-11KN - 11-19 Ford 6.7L Powerstroke Expansion Tank Kit - Natural
Mishimoto MMRT-F2D-11KN
$883.41
$726.99
Special Price: save $156.42
DEEPEST DISCOUNT APPLIED! NO COUPON NEEDED!
5 OR MORE IN STOCK AND READY TO SHIP!
FREE SHIPPING ON ORDERS OVER $100!*
*some restrictions apply
*some restrictions apply
- Part Number:
- MMRT-F2D-11KN
- SKU:
- MMRT-F2D-11KN
- UPC:
- 840197700020
- Availability:
- IN STOCK AND READY TO SHIP - See Disclaimer
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is IN STOCK, but it has a Special Order Return Policy - the product is subject to the special order return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
Mishimoto - MMRT-F2D-11KN
Aluminum Degas Tank Kit, Fits 2011-2019 Ford 6.7L Powerstroke, Natural
Aluminum Degas Tank Kit, Fits 2011-2019 Ford 6.7L Powerstroke
no more trying to shine a flashlight through a muddy tank. Our tanks also incorporate internal baffling to ensure coolant stays where it needs to be, even when the road gets rough. The Mishimoto degas tanks boast a 9.86-percent total increase in coolant capacity over the stock tanks to squeeze even more cooling potential under the hood.The Mishimoto 2011-2019 6.7L Powerstroke Aluminum Degas Tank kit is available in a stealthy micro-wrinkle black powder coat or natural finish to match any custom theme. Of course, these degas tanks are also backed by Mishimoto's Lifetime Warranty. In the unlikely event that you have an issue with either tank, Mishimoto has you, and your 2011-2019 Ford 6.7L Powerstroke, covered.
- Fits 2011-2019 Ford 6.7L Powerstroke
- Includes primary and secondary cooling system degas tanks
- Full-aluminum construction with durable, precision TIG-welds
- Increases primary degas tank capacity by 8.8%
- Increases secondary degas tank capacity by 15.65%
- Internal baffles keep coolant near overflow port during aggressive driving, preventing air entry into coolant system
- Sight glasses allow for quick and easy reading of coolant level
- Secondary degas tank includes removable fittings for installation on both 2011-2016 and 2017+ models
- Available natural finish makes customization easy through powder-coating, anodizing, or hydro-dipping
- Fit with stock caps
- Available in natural or micro-wrinkle black powder coated finish
- Mishimoto Lifetime Warranty
TechSpec Height (in): N/A
TechSpec Width (in): N/A
TechSpec Fluid Capacity (gal): 10.75
TechSpec Includes: (1) Mishimoto Aluminum Primary Degas Tank w/ Sight Glass--(1) Mishimoto Aluminum Secondary Degas Tank w/ Sight Glass--(1) Removable Quick-Disconnect Fitting (2011-2016 Models)--(1) Removable Hose Barb (2011-2016 Models)--(2) Threaded Plugs (2017+ Models)--(1) Lower Coolant Hose--(2) Mounting Brackets--(2) Worm Gear Clamps--(2) Notecards--Mounting Hardware--Mishimoto Lifetime Warranty
TechSpec Applications: 2011-2019 Ford F-250 Super Duty 6.7L Powerstroke--2011-2019 Ford F-350 Super Duty 6.7L Powerstroke
TechSpec Engine Codes: 6.7L Powerstroke
TechSpec Chassis Codes: F-250--F-350
TechSpec Material: N/A
TechSpec Installation Notes: 22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
TechSpec Note: Cutting of the stock battery tray is required to remove the stock degas tank from the battery tray. Please see installation guide for cut instructions. If your stock battery tray cannot be reused, a new degas tank and battery tray can be purchased from Ford under part number: BC3Z8A080H (2011-2016) or HC3Z-8A080-D (2017-2019)-------- Mishimoto does not provide powder coating, anodizing, or hydro-dipping services for this product. Customers who purchase the natural finish must source these services independently. The natural finish may show some surface imperfections that will not affect powder coating or other customization.----After a few heat cycles, Mishimoto recommends checking the sight glass on the side of the degas tank to confirm proper coolant level.
SellingPoint01: Fits 2011-2019 Ford 6.7L Powerstroke
SellingPoint02: Includes primary and secondary cooling system degas tanks
SellingPoint03: Full-aluminum construction with durable, precision TIG-welds
SellingPoint04: Increases primary degas tank capacity by 8.8-percent
SellingPoint05: Increases secondary degas tank capacity by 15.65-percent
SellingPoint06: Internal baffles keep coolant near overflow port during aggressive driving, preventing air entry into coolant system
SellingPoint07: Sight glasses allow for quick and easy reading of coolant level
SellingPoint08: Secondary degas tank includes removable fittings for installation on both 2011-2016 and 2017+ models
SellingPoint09: Available natural finish makes customization easy through powder-coating, anodizing, or hydro-dipping
SellingPoint10: Fit with stock caps
SellingPoint11: Available in natural or micro-wrinkle black powder coated finish
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
Install Difficulty: 4
OptionLabel: Natural
