Mishimoto MMICP-DMAX-17CP - 17-19 GM 6.6L L5P Cold-Side Pipe and Boot Kit Polished
Mishimoto MMICP-DMAX-17CP
*some restrictions apply
- Part Number:
- MMICP-DMAX-17CP
- SKU:
- MMICP-DMAX-17CP
- UPC:
- 840197700587
- Availability:
- IN STOCK AND READY TO SHIP - See Disclaimer
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is IN STOCK, but it has a Special Order Return Policy - the product is subject to the special order return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
Mishimoto - MMICP-DMAX-17CP
Cold-Side Intercooler Pipe and Boot Kit, fits Chevrolet/GMC 6.6L Duramax (L5P) 2017-2019, Polished
Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto cold-side intercooler pipe and boot kit. The factory cold-side pipe for the L5P is a measly 2.5" that chokes the engine and tight bends create even more restriction. The Mishimoto cold-side intercooler pipe is 3" in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new o-ring and spring clip to ensure a secure and leak-free fit. Unlike other available cold-side pipes on the market, our pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended. The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P cold-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products, this cold-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Up to 16% less restrictive than stock piping
- Includes new quick-disconnect O-ring and spring clip
- Eliminates failure-prone stock throttle valve connector
- Retains temp sensor harness mount for safe and secure wire routing
- Internal bead roll ensures secure connection between coupler and throttle valve
- CNC-machined quick-disconnect ensures precise, leak-free fit
- Additional bung can be drilled and tapped for sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
- Mishimoto Lifetime Warranty
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Up to 16% less restrictive than stock piping
- Includes new quick-disconnect O-ring and spring clip
- Eliminates failure-prone stock throttle valve connector
- Retains temp sensor harness mount for safe and secure wire routing
- Internal bead roll ensures secure connection between coupler and throttle valve
- CNC-machined quick-disconnect ensures precise, leak-free fit
- Additional bung can be drilled and tapped for sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Eliminates stock resonator for improved flow
- Up to 55% less restrictive than stock piping
- Bung can be drilled and tapped for additional sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
- Mishimoto Lifetime Warranty
- Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
- 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
- Up to 55% less restrictive than stock piping
- Includes new quick-disconnect O-ring and spring clip
- Hot-side eliminates stock resonator for maximum flow
- Eliminates failure-prone stock throttle valve connector
- Retains temp sensor harness mount for safe and secure wire routing
- Internal bead roll ensures secure connection between coupler and throttle valve
- CNC-machined quick-disconnect ensures precise, leak-free fit
- Additional bungs can be drilled and tapped for sensors
- Requires no additional tuning
- Includes Mishimoto silicone boots with DuraCore™ technology and Mishimoto constant-tension T-bolt clamps
- Available in polished or wrinkle-black powder coated finish
