Mishimoto MMDP-WRX-15CAT

Description

Mishimoto - MMDP-WRX-15CAT

Catted Downpipe, fits Subaru WRX 2015-2021

Mishimoto is proud to release the Performance Downpipe for the 2015+ Subaru WRX. The biggest restriction in the stock exhaust system is the downpipe. By installing the Mishimoto Performance Stainless Steel Downpipe, the FA20-DIT exhaust system is able to breathe easier, providing a significant increase in horsepower and torque when tuned. During countless dyno pulls, Mishimoto saw gains of up to 73 whp and 64 wtq with the catted downpipe, Mishimoto tune and Mishimoto Performance Air Intake using 93 octane fuel (see additional images for dyno chart). With the catted downpipe and Mishimoto tune, Mishimoto saw dyno proven gains of up to 57 whp and 52 wtq using 93 octane fuel (see additional images for dyno chart). Above all, this downpipe provides a significant torque improvement in the low end and across the entire power band. The Mishimoto Performance Downpipe provided an extremely aggressive turbo and exhaust tone under acceleration and boost, giving you that aggressive tone you have been looking for!

Direct fit for the 2015-2021 Subaru WRX 6SPD
Dyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)
Dyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a tune, and the Mishimoto Subaru WRX Performance Air Intake, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)
Significant torque improvement in the low end and across the entire power band
Fits with both CVT and manual transmissions
Extremely aggressive turbo and exhaust tone under acceleration and boost
304 stainless steel one-piece design allows for uninterrupted exhaust flow
3/8" thick stainless steel, CNC-machined four-bolt flange
3.5" to 3.0" transition out of turbo outlet allows exhaust gas to flow smoothly
Additional wideband oxygen-sensor bung and plug in ideal location for aftermarket wideband sensors
Mates with the stock cat-back exhaust
New studs for turbine housing
Includes stock gasket for turbo outlet
Mishimoto Lifetime Warranty

SellingPoint04: Significant torque improvement in the low end and across the entire power band

SellingPoint05: Fits with both CVT and manual transmissions

SellingPoint06: Extremely aggressive turbo and exhaust tone under acceleration and boost

SellingPoint07: 304 stainless steel one-piece design allows for uninterrupted exhaust flow

SellingPoint08: 3/8-in thick stainless steel, CNC-machined four-bolt flange

SellingPoint09: 3.5-in to 3.0-in transition out of turbo outlet allows exhaust gas to flow smoothly

SellingPoint10: Additional wideband oxygen-sensor bung and plug-in ideal location for aftermarket wideband sensors

SellingPoint11: Mates with the stock cat-back exhaust

SellingPoint12: New studs for turbine housing

SellingPoint13: Includes stock gasket for turbo outlet

SellingPoint14: N/A

SellingPoint15: N/A

Install Difficulty: N/A

OptionLabel: With Cat

TechSpec Material: 304 Stainless Steel

TechSpec Pipe Diameter: 3.5

TechSpec Overall Height (Inches): 65

TechSpec Overall Length (Inches): 12

TechSpec Overall Width (Inches): 5.5

TechSpec Weight (Pounds): 18

TechSpec Chassis Codes: VA

TechSpec Engine Codes: FA20DIT

TechSpec Applications: 2015-2021 Subaru WRX

TechSpec Note: This product has been designed to fit both manual and CVT transmission vehicles. Customers must select the correct transmission in the drop-down menu to receive the correct bracket.----The downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.----Customers installing the Mishimoto catted downpipe and professional engine tune/calibration must consult with their tuner for recommendations on how to handle the boost pills.

TechSpec Includes: (1) Stainless Steel Downpipe w/ 4-Bolt Turbo Flange and 2-Bolt Cat Flange--(1) Stainless Steel Transmission Bracket (Manual or CVT)--(1) High-flow Catalytic Converter--(1) Additional M18 x 1.5 O2 Bung with Plug--(1) 4-Bolt Flange Gasket--(1) 2-Bolt Flange Gasket--(4) M10 x 1.25 Exhaust Studs--(2) M10 x 1.25 x 40mm Hex Bolts, Stainless Steel--(6) M10 x 1.25 Serrated Flange Nuts, Stainless Steel--(2) M10 x 1.25 x 16mm Hex Bolts (w/ 5mm Head Height), Stainless Steel--(4) M10 Washers, Stainless Steel--(2) M8 x 1.25 x 20mm Flange Bolts, Stainless Steel--(1) M6 x 1.0 x 10mm Flange Bolt, Stainless Steel--Mishimoto Lifetime Warranty

SellingPoint01: Direct fit for the 2015-2021 Subaru WRX 6SPD

SellingPoint02: Dyno-proven gains of up to 57 whp and 52 wtq with the catted downpipe and a tune, using 93 octane fuel on 6-speed WRX (see additional images for dyno chart)

SellingPoint03: Dyno-proven gains of up to 73 whp and 64 wtq with the catted downpipe, a Mishimoto Subaru WRX Performance Air Intake, a tune, and 93 octane fuel on 6-speed WRX (see additional images for dyno chart)