null
Select Your Vehicle
0
Mishimoto MMDP-MUS4-15CAT - Ford Mustang EcoBoost Downpipe, 2015+, w/ CAT
Mishimoto MMDP-MUS4-15CAT - Ford Mustang EcoBoost Downpipe, 2015+, w/ CAT

Mishimoto MMDP-MUS4-15CAT - Ford Mustang EcoBoost Downpipe, 2015+, w/ CAT

Mishimoto MMDP-MUS4-15CAT

Part Number:
MMDP-MUS4-15CAT
SKU:
MMDP-MUS4-15CAT
UPC:
748354021097
Availability:
Email us for availability
Availability:
Special Ordered - Not In Stock
DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.

Mishimoto - MMDP-MUS4-15CAT

Ford Mustang EcoBoost Downpipe, 2015+, w/ CAT

Catted Downpipe, fits Ford Mustang EcoBoost 2015+

Mishimoto continues to expand on our line of performance exhaust system components! After months of development and testing, Mishimoto has released the stainless steel downpipe for the 2015+ Ford Mustang EcoBoost! This downpipe was designed with maximum exhaust flow in mind, using 3in mandrel-bent stainless steel tubing. This downpipe will easily outflow the stock restrictive piece, and allow your 2015+ Ford Mustang EcoBoost to make maximum power and torque! With this downpipe installed on our 2015+ Ford Mustang EcoBoost and the ECU re-flashed with a more aggressive tune, the engine was able to make an additional 65whp and 108wtq over stock with our catted downpipe installed. With the Mishimoto catless downpipe installed, we produced additional gains of 9.8 whp and 8.3 wtq over the catted model, making this a great option for those seeking maximum power output. The Mishimoto downpipe was also designed to be easy to install, as well as adaptable to many exhaust configurations. We know there are many choices out there for cat-back exhausts, and the included 3.0in-2.25in adapter allows easy mating to the stock exhaust or most aftermarket cat-back exhausts with the stock-sized 2.25in mid-pipe. The adapter can also be omitted, so the downpipe has a 3.0in V-band outlet to mate up to a custom exhaust, or the upcoming Mishimoto Cat-Back Exhaust to make a full 3in downpipe / mid-pipe combination. The two-piece downpipe design allows for an easier installation without wrestling a large bulky pipe into place. The Mishimoto downpipe comes with all of the necessary clamps and flanges you'll need for installation, and mates perfectly to your stock turbo gasket, making the need to purchase additional gaskets or hardware unnecessary! Like all of our EcoBoost Mustang parts, this downpipe comes with the Mishimoto Lifetime Warranty!

  • Direct fit for the 2015+ Ford Mustang EcoBoost
  • Fits with both manual and automatic transmissions
  • Extremely aggressive turbo and exhaust tone under acceleration and boost
  • 304 Stainless Steel 2-piece design allows for uninterrupted exhaust flow and an easy installation
  • 3in exhaust diameter for maximum flow

TechSpec Material: 304 Stainless Steel
TechSpec Pipe Diameter: 3
TechSpec Overall Height (Inches): N/A
TechSpec Overall Length (Inches): N/A
TechSpec Overall Width (Inches): N/A
TechSpec Weight (Pounds): N/A
TechSpec Chassis Codes: S-550
TechSpec Engine Codes: 2.3L EcoBoost
TechSpec Applications: Ford Mustang EcoBoost 2015-2017
TechSpec Note: This product fits both stock and automatic transmissions; there are no additional parts needed for automatic transmission fitment. This downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune that is applied to the vehicle, and other supporting modifications that are installed.----The Mishimoto downpipe is for track and off-road use only. The customer must have a professional engine tune/calibration after installing the downpipe.----Catalytic Converter: 200 Cell Spun Metallic Core
TechSpec Includes: (1) Stainless Steel, 2-Piece Downpipe w/ floating 2-bolt flange, slip joint connector, and V-band flange--(1) High-Flow Catalytic Converter--(1) 3.0-inch Slip Joint Clamp--(1) 3.0-inch V-band Clamp--(1) 3.0-inch to 2.25-inch Exhaust Adapter (for use with stock exhaust or most aftermarket cat-back exhaust with a 2.25-inch mid-pipe)--Mishimoto Lifetime Warranty
SellingPoint01: Direct fit for the 2015+ Ford Mustang EcoBoost
SellingPoint02: Fits with both manual and automatic transmissions
SellingPoint03: Extremely aggressive turbo and exhaust tone under acceleration and boost
SellingPoint04: 304 Stainless Steel 2-piece design allows for uninterrupted exhaust flow and an easy installation
SellingPoint05: Includes stainless steel
SellingPoint06: 2-bolt mounting flange to the turbo
SellingPoint07: 3-in exhaust diameter for maximum flow
SellingPoint08: Additional wideband O2 sensor bung for aftermarket wideband sensors
SellingPoint09: Mates with the stock cat-back exhaust or any aftermarket exhaust with a 2.25-in mid-pipe
SellingPoint10: High flow catalytic converter (optional)
SellingPoint11: Mishimoto Lifetime Warranty
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
Install Difficulty: N/A
OptionLabel: With Cat