Holley 300-255 - Single Plane Intake Manifold Kit
Holley 300-255
*some restrictions apply
- Part Number:
- 300-255
- SKU:
- HOL-300-255
- UPC:
- 090127052310
- Availability:
- IN STOCK AND READY TO SHIP - See Disclaimer
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is IN STOCK, but it has a Special Order Return Policy - the product is subject to the special order return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
Holley - 300-255
Intake Manifold - Single-Plane Race - Square Bore - Single Plane - Aluminum - Natural - LS1 / LS2 / LS6 - GM LS-Series - Kit
Single Plane Intake Manifold Kit; Carbureted; w/Cathedral Port Cyl. Heads; Front Height/Rear 7.32 in.; RPM Power Band 2500-7000; Satin Finish; For Use w/LS1/LS2/LS6;
The new Holley Single-Plane Race intake manifold were designed with performance in mind. They feature a race bred, two piece split feature that was previously only found on the most expensive race intakes. The manifold will fit GM LS Gen III engines with cathedral port heads and are intended for 4150 style square bore flanged carburetors or throttle body EFI.The LS Race single-plane intake manifold was designed for hi-performance/racing engine applications, 5.3 to 6.2+ liter displacement, and maximum engine speeds of 6000-7000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the RPM spectrum while providing maximum performance up to 7000 rpm.The Holley LS Race manifold incorporates a split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap. With shoulder bolt locators and O-ring seal, reassembly is simple and precise. Technical Data‚· A-B Height - 7.32 in. (0° carb flange angle)ï‚· Port Size- 3.28 in. Height x 1.10 in. Wide‚· Throttle Body Flange - Standard 4150 for up to 1-3/4 in. diameter throttle boresï‚· As-Cast Runner Cross-Sectional Area - 3.5 in² at the runner entry tapered to 2.9 in² at the flange exit
- Maximum performance race design with hood clearance consideration
- Lighter than other split race intakes
- Split feature making porting efforts easy!
- 33 to 50% the price of other split race intakes
- Captured O-ring seals at head ports and split
- Vacuum Port options include (2) 1/8, (1) 1/4, and (1) 3/8, NPT ports at the carb flange
- Billet Fuel Rails and rail mounting hardware included.
