Edelbrock 7505

Description

Edelbrock - 7505

Intake Manifold - Dual Quad - Dual Square Bore - Dual Plane - Aluminum - Natural - Ford FE-Series - Each

Edelbrock RPM Air-Gap Dual-Quad FE Intake Manifold for 1958-1976 Ford 332-428 FE Big-Block V-8

Edelbrock part #7505 RPM Air-Gap Dual-Quad FE #7505 intake manifold is designed for 1960-later high-performance's street 390-406-410-427-428 c.i.d. Ford FE engines with low/medium rise or Edelbrock Performer RPM FE heads #60059 or #60069. The manifold carb pad is setup to fit Edelbrock carburetors only, will not work with other square flange carburetors. In Dyno tests on a 390 with Performer RPM heads #60069, Performer RPM camshaft #7106 Thunder Series AVS #1803 and #1804 carburetors, it made 452 hp and 428 ft-lbs. torque. Will not fit 427 Ford Hi-Riser and Tunnel Port engines. Has machined boss for a breather flange at rear.

Designed for 1500 to 6500 RPM Performance
Dual-Quad Power And Nostalgic Looks

Finish: Satin

Front Maximum Height: 4.850

Center Maximum Height: 5.280

EGR Port: No

RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Material: Aluminum

Series: Dual-Quad/Multi Carb

Basic Operating RPM Range: 1500-6500

Grade Type: Performance

CNC Ported: No

Single Or Dual Plane Type: Dual

Rear Maximum Height: 5.700

Gasket Or Seal Included: No

Flange Type: 4150 Dual-Quad (4-Barrel Square Bore)

Vehicle Model: Ford