Edelbrock 7111

Description

Edelbrock - 7111

Intake Manifold - Performer RPM Olds 350 - Spread / Square Bore - Dual Plane - Aluminum - Natural - Oldsmobile V8 - Each

Edelbrock Performer Olds 350 Intake Manifold for Oldsmobile 330-403 Small-Block V8

Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.

Best for the Ultimate in Street High-Performance
Designed for Idle to 5500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 Deg. Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

EGR Port: No

Finish: Satin

Rear Maximum Height: 5.800

Basic Operating RPM Range: 1500-6500

Front Maximum Height: 4.800

Center Maximum Height: 5.300

Material: Aluminum

Grade Type: Performance

RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Single Or Dual Plane Type: Dual

Series: Performer RPM

Gasket Or Seal Included: No

Vehicle Model: Oldsmobile

Flange Type: 4150

CNC Ported: No