Edelbrock 61645 - Cylinder Head BB Ford Performer RPM 460 Cj for Hydraulic Roller Cam Complete
Edelbrock 61645
*some restrictions apply
- Part Number:
- 61645
- SKU:
- EDEL-61645
- UPC:
- 085347616459
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
- Order Terms:
- Due to supply chain issues, this brand has extended delivery times and is special ordered. If you have a question about delivery time, please contact us prior to purchase. Please do not order unless you can wait.
Edelbrock - 61645
Cylinder Head; BB Ford; Performer RPM; 460 CJ; For Hydraulic Roller Cam; Complet
Edelbrock part #61645 Performer RPM CJ cylinder heads are designed for use with 1968-87 429/460 Fords and SVO 514 engine applications.
Cylinder Head Specifications: Combustion chamber volume:-?75cc, Intake runner, volume:-?310cc, Exhaust runner volume:-?100cc, Intake valve diameter:-?2.19in, Exhaust valve diameter:-?1.76in, Valve stem diameter:-?11/32in, Valve guides:-?Manganese bronze, Deck thickness:-?5/8in, Valve spring diameter:-?1.55in, Valve spring maximum lift:-?.700in, Rocker stud:-?7/16in, Guideplate:-?Hardended steel, Pushrod diameter:-?3/8in, Exhaust port location:-?Stock, Spark plug fitment:-?14mm x 3/4 reach, gasket seat. INSTALLATION NOTE: Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4in reach with flat gasket seat. Deck thickness: 5/8in, rocker stud diameter: 7/16in, pushrod diameter: 3/8in (width of slot in guide plate). Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Deck thickness: 5/8in, rocker stud diameter: 7/16in, pushrod diameter: 3/8in (width of slot in guide plate).
- Out-of-the-Box Bolt-On Performance
- Hand-Blended Intake and Exhaust Bowls
- Ideal For Drag Racing
- Ideal For Marine Applications
- Over 500+ At 6500 RPM
