Edelbrock 2945 - Victor 5.0 Intake Manifold for Ford 5.0 Small-Block V8

Edelbrock - 2945

INTAKE MANIFOLD

Edelbrock Victor 5.0 Intake Manifold for Ford 5.0 Small-Block V8

Designed for 5.0L-based competition EFI engines, the Victor 5.0 EFI aluminum intake manifold is for non-emission, racing applications. Intended for engines modified to produce 400 to 540+ horsepower, this intake manifold features shorter and larger runners for power to 7500 rpm. Runners are 11.5" long and 50% larger in area than Performer 5.0 #3821 runners. The base features an air-gap design and will accept stock or stock replacement fuel rails. The upper manifold will clear tall valve covers and large fuel pressure regulators. The upper and plenum cover are powder-coated light titanium gray. The base is satin aluminum and not powder-coated. Designed to work with Edelbrock Victor Jr. or Victor cylinder heads. Edelbrock 75mm throttle body is recommended for most applications with no EGR spacer. Larger injectors will be needed depending upon power levels. 1994-95 Mustangs require conversion to '87-93 inlet systems. Manifold includes throttle cable bracket. Installation Notes: Recommended intake gasket: Fel-Pro #1262. Overall height: 11.40".

• For 4000 to 7500 RPM High-Performance Engines
• Single-Plane Design
• For Engines Producing 400 to 540+ Horsepower
• With Shorter Larger Runners For Power To 7500 RPM
• Base Features Air Gap to Cool Runners
• Accepts Stock Style Fuel Rails
• Upper Plenum Cover Powder-Coated Titanium Grey
• Includes Throttle Cable Bracket