Dinan D660-0079 - Freeflow Axle-Back Exhaust

Dinan - D660-0079

Dinan Free Flow Axle-Back Exhaust - 2018-2023 BMW M5

Freeflow Axle-Back Exhaust; 304 Stainless Steel Construction; 10 Max Horsepower Gain At 6600 RPM; 8 lbs.-ft. Max Torque Gain; 4 in. Diameter Polished And Laser Engraved Tips;

In order to achieve desired sound volume and tone Dinan felt the tubing was enlarged to 83 mm. (vs 80 mm. stock) to allow freer flow throughout the entirety of the system. The larger tubing is fed into a muffler that is typical of all Dinan exhaust design and utilizes absorption and reactive technologies designed to improve exhaust flow and reduce back pressure. The combination results in increased power output and a great sporty sound that is civilized when you want it to be, and pleasantly aggressive under hard acceleration. This is partly courtesy of the retained computer controlled exhaust valves that limit noise during low speed driving and open fully during high-load conditions to allow free flow and greater sound as the bulk of the gases are bypassing the muffler. Like all Dinan exhausts, our M5 free flow exhaust is engineered to reduce low-RPM drone so the cabin o

• Enjoyably Louder / Sportier Sound
• Increases Power Output And Provides Great Sporty Sound
• Tubing Utilizes Absorption And Reactive Technologies
• Larger Diameter Piping For Increased Flow / 83 / 80 mm.
• Stock Exhaust Valve Actuators Are Reused
• Operation Of Exhaust Valve Is Unchanged
• Computer Controlled Exhaust Valves Are Retained
• Valves Are Open Fully During High-Load Conditions
• Twin Secondary Exhaust Valves w/Whopping 76 mm. Diameter
• Valves Are 30 Pct. Less Restrictive Than The OE Valves
• Easy Bolt-On Installation w/Included Mounting Hardware
• Tips Masterfully Fill Up And Accentuate Upon The Factory Cut-Outs