DEI 95127 - Exhaust Wrap & Combo Tie Kit 2in x 50ft 2PK - Titanium

DEI - 95127

Titanium(TM) Exhaust Wrap Kit

Exhaust Wrap Kit; Titanium Color;

Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Reduce under hood temperatures by 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1800°F direct/2500°F radiant Added durability and heat retention Kit contains: Two (2) rolls of 2 in. x 50' Titanium exhaust wrap Four (4) 14 in. stainless steel locking ties Eight (8) 8 in. stainless steel locking ties NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Note of Caution:Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems:DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.

• Includes Two Rolls Of Exhaust Wrap/Four 14 in. Ties/Eight 8 in. Ties
• Reduce Under Hood Temperatures By 50 Percent
• Decreases Exhaust Density And Increases Exhaust Flow
• Improves Horsepower
• Withstands 1800 Degrees F Direct/2500 Degrees F Radiant