COMP Cams 623-16

Description

COMP Cams - 623-16

Valve Lock - Street Locks - 7 Degree - 8 mm Valve Stem - Standard Height - Steel - Black Oxide - GM LS-Series - Set of 32

COMP Cams Machined Steel Race Locks, 7? Lock Angle for 8mm Valve Stem Diameter

These single groove Machined Steel Street Locks with 7? lock angle and 8mm valve stem size are perfect locks for GM Gen III/LS1/LS2/LS6 applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small.

Lock Angle: 7

Lock Series: Race Locks

Material: Machined Steel

Number of Grooves: Single

Valve Stem Diameter: 8

Amazon ASIN: B000V9HYHM

C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, but must be a race/competition only vehicle.

C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.

C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, but must meet tailpipe emission standards for year of vehicle.

C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.

C.A.R.B. Exempt for On-Road Vehicles?: Yes

C.A.R.B. Exemption Reason: No impact on pollution output of vehicle.