null
Select Your Vehicle
0
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

Canton 15-240

$597.60 $488.99
Special Price: save $108.61
DEEPEST DISCOUNT APPLIED! NO COUPON NEEDED!
ONLY 3 LEFT IN STOCK AND READY TO SHIP!
FREE SHIPPING ON ORDERS OVER $100!*
*some restrictions apply
Part Number:
15-240
SKU:
BGTF-15-240
UPC:
887753712127
Availability:
IN STOCK AND READY TO SHIP

Canton - 15-240

Engine Oil Pan - Street / Strip / Road Race - Rear Sump - 7 qt - 7 in Deep - Steel - Cadmium - Small Block Chevy - Chevy Corvette 1984-96 - Each

Canton 15-240 Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

This SBC Corvette road race pan is for pre-?80 blocks with left side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long sump, with a 7 quart system capacity. Will work with stock starters. This pan requires one of our pickups.

  • Five Trap Door Baffles
  • Crank Scraper
  • Built In Screen Windage Tray
  • 1/2" NPT Temperature Bung
  • Provision For Our Pan Mounted Dipstick
  • Magnetic Drain Plug
  • Includes a 20MM fitting For A Low Oil Warning Sender (Purchase 22-405 Plug if not using sender)

Baffled: Yes
Material: 16 Gauge Steel
Sump Width: 13.75 inches
Sump Depth: 7 inches
Stoke: 3.75 inches
Recommended Accessory 8: 88-100 - SBC Pre ?85 Oil Pan Gasket
Recommended Accessory 7: 22-405 - 20MM Plug for Oil Level Sender Port
Recommended Accessory 6: 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting
Recommended Accessory 5: 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting
Recommended Accessory 4: 20-079 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet
Recommended Accessory 3: 20-074 - Pickup for SBC High Volume Oil Pump M55HV
Recommended Accessory 2: 20-049 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet
Recommended Accessory 1: 20-044 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A
Pickup Included: No
Kicked Out: Yes
Capacity: 7 Quart System Capacity
Hardware Included: No
Gasket or Seal Included: No
Finish: Silver Plating
Feature 6: 20mm Fitting for GM Low Oil Warning Sender
Feature 5: Provision for Pan Mounted Dipstick
Feature 4: 1/2" NPT Temperature Bung
Feature 3: Bolt in Windage Tray
Feature 2: Crank Scraper
Feature 1: Trap Door Baffle for Oil Control
Engine: For S.B. Chevy Pre-1980 Blocks
Drain Plug Included: Yes
Dipstick Port: Yes
Crank Scraper Included: Yes
Windage Tray Included: Yes