BMR SB013H - 08-09 Pontiac G8 Rear Hollow 22mm Adj. Sway Bar Kit w/ Bushings - Black Hammertone

BMR SB013H - 08-09 Pontiac G8 Rear Hollow 22mm Adj. Sway Bar Kit w/ Bushings - Black Hammertone

BMR SB013H

$142.95 $129.95
Special Price: save $13.00
DEEPEST DISCOUNT APPLIED! NO COUPON NEEDED!
ONLY 3 LEFT IN STOCK AND READY TO SHIP!
FREE SHIPPING ON ORDERS OVER $100!*
*some restrictions apply
Part Number:
SB013H
SKU:
BMR-SB013H
UPC:
887753325884
Availability:
IN STOCK AND READY TO SHIP

BMR - SB013H

Sway Bar Kit With Bushings, Rear, Adjustable, Hollow 22mm

BMR Suspension designed the SB013 sway bar kit for street performance, autocross, and road race applications.

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB013 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 22mm DOM tubing, the SB013 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The SB013 attaches to your G8 with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.

Mounting Hardware Included: No
Position: Rear
Quantity: Sold as a kit
Rear Sway Bar Adjustable: 3-position
Rear Sway Bar Diameter (in): 0.875 inches
Rear Sway Bar Diameter (mm): 22.0 mm
Rear Sway Bar Type: Hollow
Sway Bar Finish: Black hammertone powdercoated
Sway Bar Material: Steel