null
Banks Power 48131 - Monster Exhaust System

Banks Power 48131 - Monster Exhaust System

Banks Power 48131

Part Number:
48131
SKU:
BANKS-48131
UPC:
801279481312
Availability:
Email us for availability

Banks Power - 48131

Monster Exhaust; Single; S/S-Chrome Tip-07-08 Toyota Tundra; 5.7L-Rcsb

Cuts back pressure up to 76 Percent. Improves flow up to 114 Percent. Add up to 11 hp and 11 lb-ft. 3-inch mandrel-bent cat-back pipes with Straight-thru muffler and 4-inch polished Chrome tip. 3 inch stainless mandrel-bent cat-back pipes and straight-thru muffler cut backpressure by 76 percent, improve flow by 114 percent, and add up to 11 hp and 11 lb-ft. Improves acceleration, too! throaty sound, 4 inch polished tip. (2007-2014). Toyota Tundra, 5.7L (2007-2015), 4.6L V8 (2014-2015): Monster exhaust system's 3 inch mandrel-bent pipes are formed of stainless, heavy-wall tubing and bolt behind the catalytic converters, slashing backpressure by 76 percent. Banks free-flowing, straight-through polished-stainless Monster muffler has very-high-temperature packing, and is sound-tested to deliver a rich, throaty sound without the annoying drone. The system more than doubles the stock flow, increasing it by 114 percent. As a result, the Tundra engine is able to produce up to 11 more hp and 11 more lb-ft of torque, which means better acceleration. Reducing backpressure and enhancing the exhaust flow increase fuel efficiency, all with an eye-catching finish. Monster flashes a stainless 4 inch rolled-edge angle-cut tailpipe tip in your choice of polished chrome-over stainless or high-temp black! Banks Monster exhaust system is vehicle-specific for bolt-on installation. Includes: Polished-stainless 3 inch straight-through Monster muffler, Stainless 3 inch constant-diameter intermediate pipe, Y-pipe and tailpipe, Polished-stainless 4 inch angle-cut tailpipe tip with rolled edge, Mounting hardware. Monster Exhaust System, Single Exit, Chrome Tip for use with 2007-2008 Toyota Tundra, 5.7L RCSB Regular Cab Short Bed Key Features 3 inch mandrel bent Stainless Steel construction Dramatically improves flow up to 114 percent Cuts backpressure up to 76 percent Add up to 11 hp and 11 lb-ft 4 inch polished CHROME tip Lowers exhaust gas temps Straight-thru muffler Maximum Airflow

  • Virtually Eliminates Backpressure
  • Nearly Triples Flow
  • Lowers Exhaust Gas Temperature
  • Delivers Commanding Exhaust Tone
  • Stainless Steel
  • Easy Install
  • Lifetime Warranty

Exhaust Type: Single
Exit Position: Single Side
Exit Style: Turn Out
Inlet Inside Diameter: 3.000 in.
Material: Stainless Steel
Outlet Outside Diameter: 3.000 in.
Tail Pipe Diameter: 3.000 in.
Tip Diameter: 4.000 in.
Tubing Diameter: 3.000 in.