Van Compass 7057 - Complete Striker 2" Lift Kit, Front and Rear, Sprinter 2500 4WD (2019-2022)
DISCLAIMER: This Item Is Special Ordered, which may have cancellation or return restrictions. Please see our terms and conditions for more information.
AVAILABILITY: This Item Is Out Of Stock.
Couldn't load pickup availability
Description
Description
Van Compass 7057 - Complete Striker 2" Lift Kit, Front and Rear, Sprinter 2500 4WD (2019-2022)
Striker Complete 2 Inch Lift Kit - Sprinter 4X4,2500 Only
The Van Compass Striker 4x4 lift kit creates the clearance needed to fit larger tires and push deeper into back country landscapes with confidence in the increased capability. Through hours of careful development and design, we've created a system that lifts the van with as few compromises to the original design parameters of the vehicle as possible. Using a mix of machined and welded spacers, we move the front subframe to allow for the CVs, tie rods, and control arms to all cycle in their original geometry range set by Mercedes. At the rear, a taller version of our Mini Leaf Spring pack is paired with longer sway bar links, shock relocation brackets, and bump stop spacers to ensure that nothing binds, over-extends, or can over-compression on axle articulation. With proper wheel offset and fender trimming, fitment of a 35 x 12.50 tire is possible, for a huge increase in traction and ground clearance.
- At the rear, a taller version of our Mini Leaf Spring pack is paired with longer sway bar links, shock relocation brackets, and bump stop spacers to ensure that nothing binds, over-extends, or can over-compression on axle articulation
- Through hours of careful development and design, we've created a system that lifts the van with as few compromises to the original design parameters of the vehicle as possible
- With proper wheel offset and fender trimming, fitment of a 35 x 12
- 50 tire is possible, for a huge increase in traction and ground clearance
- The Van Compass Striker 4x4 lift kit creates the clearance needed to fit larger tires and push deeper into back country landscapes with confidence in the increased capability
- Using a mix of machined and welded spacers, we move the front subframe to allow for the CVs, tie rods, and control arms to all cycle in their original geometry range set by Mercedes
