Unisteer 8010830-01 - Power Rack & Pinion - 67-70 Mustang

Unisteer 8010830-01 - Power Rack & Pinion - 67-70 Mustang

Rack and Pinion - Power - Aluminum - Black Powder Coat - Ford Mustang 1967-70 - Kit

Rack and Pinion - Power - Late 1967-70 Mustang - 289-351W

Love driving Your Mustang but hate the way it steers? Revitalize your classic mustang’s steering and handling with one of Unisteer’s early Mustang Rack & Pinion Kits! Eliminate that slop and constant steering correction.

• Our early Mustang Rack Kit greatly improves the steering and handling when compared to that old steering box.
• This is a center take-off style rack and pinion that utilizes an offset ball center bar which duplicates the stock center link; this means that the rack matches the exact geometry of the original front suspension.
• Effectively eliminating bump steer, and creating great handling.
• The rack comes mounted to a one piece mounting bracket which replaces the tubular cross member located directly behind the front suspension.
• Since the racks are center take-off style, we off set the rack on the mounting bracket; moving the pinions closer to the driver-side frame which makes connection of the steering linkage to a column as easy as possible.
• From a steering standpoint, we found that the early Mustangs split mid 1967 and there were slight differences, so make sure you order the correct kit!
• Additionally, later model Mustangs and Cougars may look the same, but are NOT - check out our Cougar Rack & Pinion Kits.
• The kit will work on Small Block cars, and have been successfully used with Stock Manifolds, and Hooker Super Comp Headers.
• Other Headers may work, but we can't guarantee an easy install. This kit requires the use of a mini starter. This kit may require some modifications on Mustangs with Dart Heads and other Aftermarket Heads requiring different headers.
• Note: If you have a 351C motor you will need to use Headman headers.