Unisteer 8010770-01 - Rack and Pinion - Power 1964-67 GM A-Body

Unisteer 8010770-01 - Rack and Pinion - Power 1964-67 GM A-Body

Rack and Pinion - Power - Tie Rods / Brackets Included - Aluminum - Black Powder Coat - GM A-Body 1964-67 - Kit

Rack and Pinion - Power - 1964-67 GM A-Body

Class up your Chevelle/El Camino steering with this bolt in Rack & Pinion to greatly improve your handling, your steering, and your life in the fast lane...ok maybe not that far.

• This was specifically designed to fit Chevy A-Body cars. This is a front steer center take off style rack & pinion mounted on a one-piece bracket that bolts in the same mounting holes used for the factory steering box and idler arm.
• The rack matches the stock suspension on these cars replicating the original center link.
• This clears the Z-Bar and 4 Speed Linkage. It has been used on both Small Block and Big Block motor cars.
• Stock Manifolds work with both motors and on Big Blocks, we have used Super Comp Headers while on Small Block Motors,
• Hooker Competition Headers have been used. Other headers may work but may need modification.
• Note: Rack & Pinion on Bracket Only.
• Note: Most Aftermarket Heads have raised exhaust floors by 1/4" to 1/2" which does not make clearance any easier.
• Note: This will also bolt into a 1964-67 big block El Camino.
• Big block motor cars: The original Mark IV design has a deck height of 9.8", the Mark V and Mark VI designs have a deck height of 10.2". The 0.4" difference affects clearance on these big block cars.
• Mark V and Mark VI designed cars will probably need header modification.