Unisteer 8010700-01 - Power Rack & Pinion Kit 68-72 GM A-Body

Unisteer 8010700-01 - Power Rack & Pinion Kit 68-72 GM A-Body

Rack and Pinion - Power - Aluminum - Black Powder Coat - GM A-Body 1968-72 - Kit

Rack and Pinion - Power - 1968-72 GM A-Body-Rack and Bracket Only!

Detroit was making muscle during these years – but they missed the boat on steering! Fix it by bolting on one of our Rack & Pinion Kits! Make your car handle as good as it looks!

• Rack and Bracket Only!
• We used a front steer center take off style rack and pinion on a one piece bracket that bolts up in the same location as the original steering box and idler arm. This kit does clear the Z-Bar and 4 Speed Linkage.
• We have installed this kit on cars with both big block and small block motors. On the Big Block, stock manifolds and Super Comp Headers work, and on the Small Block motor Hooker Comp Headers work.
• Other headers may work, but may need modification.
• The kit is set up to go on cars with either small blocks or big blocks with long water pumps. If you have a short water pump, we can easily accommodate, but you will need to call us, and we'll swap in the proper components.
• Note: Some aftermarket cylinder heads may have a raised exhaust floor anywhere from 0.25" - 0.4" which may also affect your header location.
• Note: This kit will also bolt into a 1968-72 small block El Camino and Monte Carlo.
• Big block motors: The original Mart IV design has a deck height of 9.8", the Mark V and Mark VI designs have a deck height of 10.2". The 0.4" difference affects clearance on these big block cars.
• Mark V and Mark VI designed cars will probably need more header modification.