Superchips 42455 - Pulsar XT for 2020-2023 Jeep 3.0L EcoDiesel
Programmers and Tuners have a strict return policy. Once the seal is broken, they can not be returned. This is because they may be locked and unusable. Make sure it will work on your car prior to ordering.
Couldn't load pickup availability
Description
Description
Superchips 42455 - Pulsar XT for 2020-2023 Jeep 3.0L EcoDiesel
Pulsar XT for 2020-2023 Jeep Wrangler and Gladiator 3.0L EcoDiesel
Our 2022 Gladiator on 35's shaved 1.38-seconds off it's 0-60mph times and picked up 3.5mph in the 1/4-mile with XT on Level 5! It's power and torque you'll feel from the seat.
- Supports 2020-2023 Jeep Wrangler and Gladiator 3.0D
- User adjustable power levels on the fly through steering wheel controls
- Adds up to 38hp/73tq at peak
- Improves economy, throttle response, low end torque, and performance
- 7 throttle sensitivity settings adjustable in the app for each power level
- Smartphone App control for Android and IOS
- Calibrate for tire sizes 26-40"
- Manual Engine Fan Control
- Enable/disable TPMS or adjust warning threshold
- Enable/disable Auto Start/Stop
- Read and clear DTC's
- Gear ratio adjust for 2.72-5.00
- Traction Control Disable
- Configure Lighting like Fog Beams with High Beams, License Plate Off with Reverse, Daytime Running off with Turn Signal
- Engine High Idle - Command engine idle from 900-2000rpm while in park with steering wheel controls
- Manual DPF Regen
- Axle Lockers in 2wd and 4-High
- Swaybar Disconnect in 2wd, 4-Lo and 4-High





