Innovative Mounts 29550-85A - 92-95 Civic 94-01 Integra Conversion Engine Mount Kit H-Series Manual Auto To Manual 400-500HP 85A Grey
Innovative Mounts 29550-85A
*some restrictions apply
- Part Number:
- 29550-85A
- SKU:
- INM-29550-85A
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
Innovative Mounts - 29550-85A
Conversion Engine Mount Kit For the 1992-1995 Honda Civic EG/EH/EJ and 1994-2001 Acura Integra DC). Designed to fit the stock Manual or Automatic Civic EG/EH/EJ and Integra DC when converting to an H-Series Engine With Manual Transmission.
- 400-500HP 85A Grey
- Uses Factory/OEM Hardware
- A/C and Powersteering Can Be Used
- Unique No-Tear Vibration Minimizing Bushings
- Optional Bushing Stiffness'
- Positions the Engine With No Axle Bind
- Bolt-On
- CAD/CAM Designed
- Stress Analyzed
- Lifetime Warranty
Note:
In order to use the Engine Mount from this Kit you will need to use the 92-01 Prelude H-Series Engine timing belt Post Mount. Honda Part Number: 11910-P13-000
This Swap will need the T-Bracket from either the 90-93 Accord DX/LX EX will not work or the 92-96 Prelude V6.
Alternatively you can purchase this T-Bracket here:
90-93 Accord 92-96 Prelude Replacement Rear Mounting Bracket 59630
Note:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts Can Not be returned or Swapped out after they have been Bolted down revealing Bolt impressions).
Please Make sure this Kit fits your vehicle before Bolting them in place.
Innovative Engine Mounts are built for performance driving.
Although Innovative's bushings are made to absorb Engine vibration, you may still notice slight vibration depending on your Engine's Series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock Mounts.
By switching to stiffer Mounts without the fluid reduces wheel hop and increases driving response.
Drivetrain options:
Right Axle 90-93 Integra
You must use a Prelude/Accord inner CV joint in order for the axle to lock into the Transmission.
The inner spline shaft is slightly longer for the Prelude/Accord than the Integra.
A 90-93 Integra shaft and outer CV will work With the Prelude inner.
Left Axle 1990 Manual Accord Intermediate ShaftOr Alternatively:
Left and Right Axles 90-93 Integra With Prelude inner cv joint on the right axle)
Weight: 15lbs
