Edelbrock 61419 - Race Cyl Head Musi CNC BBC Victor 24Deg Bare
Edelbrock 61419
*some restrictions apply
- Part Number:
- 61419
- SKU:
- EDEL-61419
- UPC:
- 085347614196
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
- Order Terms:
- Due to supply chain issues, this brand has extended delivery times and is special ordered. If you have a question about delivery time, please contact us prior to purchase. Please do not order unless you can wait.
Edelbrock - 61419
Race Cyl Head; Musi CNC BBC Victor 24Deg; Bare
Edelbrock part #61419 Victor 24 Degree CNC rectangular port bare cylinder heads are designed for use with large cubic inch and/or high air demand Big Block Chevy engines with a minimum 4.47" diameter bore.
Edelbrock and Pat Musi Performance have combined efforts to produce the finest standard intake port location big-block Chevy head available. These cylinder heads feature an extra thick deck and extra material in the spring pockets for a heavy-duty casting that can be used with high-lift cam and heavy spring combinations. Edelbrock equips the complete cylinder heads with Manley dual-spring valve springs and titanium retainers good for up to .880 lift. The port designs are large oval (367 lh / 377 rh) that produce impressive flow - out-of-the-box. The exhaust port exits are raised .750 to greatly improve exhaust flow and power. Off the shelf large oval-port intakes are available through Edelbrock. INSTALLATION NOTE: Bare heads will have valve guides & seats installed, but will require final sizing & a valve job to match the valves you will be using. Deck thickness: 9/16", rocker stud diameter: 7/16", pushrod diameter: 3/8" (width of slot in guide plate).
- Designed By Pat Musi For Competition
- Complete Head with 2.30 Int. 1.90 Exh. Valves
- Rolled Over Deck; Altered Valve Locations
- Fully CNC Head Ported Intake Ports/Exhaust Throats
- Only Conventional Port Head Capable of 950+ HP
- 118cc Chamber; 367cc-377cc Intake Port
