Edelbrock 60899 - Single Perf RPM SBC 64cc Head Comp
Edelbrock 60899
*some restrictions apply
- Part Number:
- 60899
- SKU:
- EDEL-60899
- UPC:
- 085347608997
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
- Order Terms:
- Due to supply chain issues, this brand has extended delivery times and is special ordered. If you have a question about delivery time, please contact us prior to purchase. Please do not order unless you can wait.
Edelbrock - 60899
Cylinder Head - Performer RPM - Assembled - 2.020 / 1.600 in Valve - 195 cc Intake - 64 cc Chamber - 1.460 in Springs - Straight Plug - Aluminum - Small Block Chevy - Each
The Edelbrock #60899 Performer RPM cylinder heads are designed for 1955-86 SB Chevy engines. The Edelbrock #60899 Performer RPM heads are perfect for street performance, daily drivers and muscle cars where performance is needed.
Cylinder Head Specifications: Combustion chamber volume: 65cc / 70cc; Intake runner volume: 185cc & 195cc; Exhaust runner volume: 65cc; Intake valve diameter: 2.02"; Exhaust valve diameter: 1.60"; Valve stem diameter: 11/32"; Valve guides: Maganese Bronze; Deck thickness: 9/16"; Valve spring diameter: 1.46"; Valve spring maximum lift: .575"; Rocker stud: 3/8"; Guideplate: Hardened steel; Pushrod diameter: 5/16"; Valve angle: 23°; Exhaust port location: Stock; Spark plug fitment: 14mm x .750 reach, gasket seat. * Performer RPM Cylinder Heads have all of the same great features as our Performer series heads, but are available with straight or angled spark plug configuration to fit a variety of exhaust applications. Available with a polished finish for a show quality look! ** Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required. Edelbrock pushrods #9629 are recommended. Use Head Bolt Kits for easy installation. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 283, 305, 307 c.i.d.) except with cams having less than .450" valve lift.
- Out-of-the-Box Bolt-On Performance
- Hand-Blended Intake and Exhaust Bowls
- 64cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
