Edelbrock 36112 - Pro-Flo 4+ EFI Ignition & Engine Position Harness Chevy LS 24x Crank/Cam
Edelbrock 36112
*some restrictions apply
- Part Number:
- 36112
- SKU:
- EDEL-36112
- UPC:
- 085347361120
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
- Order Terms:
- Due to supply chain issues, this brand has extended delivery times and is special ordered. If you have a question about delivery time, please contact us prior to purchase. Please do not order unless you can wait.
Edelbrock - 36112
Pro-Flo 4+ EFI Ignition & Engine Position Harness 36112 Chevy LS 24x Crank/Cam
This Ignition and Engine Harness is required and sold separately from PF4+ Chevy LS EFI System #36130. Harness has connections for Coil Pack Harnesses, Crank Sensor, Cam Sensor and Engine Ground.
The Edelbrock Ignition/IAC Harness #35713 is a supplemental kit designed specifically for those who have purchased or are planning to purchase a Pro-Flo 4 EFI System for the Chevrolet Gen III 24X LS engine with either the 4150-style or Pro-Flo XT intake manifold. The #35713 Harness Kit is required and must be ordered separately due to the two different crank trigger designs of the Gen III (24X reluctor) and Gen IV (58X reluctor) LS engines. The Gen III 24X LS engine is easily identified by the crank sensor located at the rear of the block behind the starter, and the camshaft sensor located at the rear of the block on top. The Edelbrock Ignition/IAC Harness #35713 connects to the Pro-Flo 4 LS EFI Kit's main harness labeled "Coils/IAC" and provides connections for the Coil Pack harness, Crank Sensor, Cam Sensor, and Stepper IAC Motor. This harness is a supplemental kit that is required when installing a Pro-Flo 4 LS EFI Kit on a Chevy Gen III 24X LS engine. Edelbrock sells the Gen III #35713 and Gen IV #35714 harnesses separately from the Gen III and Gen IV Pro-Flo 4 EFI Systems in an effort to keep production costs of the two LS EFI LS kits to a minimum and prevent the waste of an unused harness in each kit. Detailed instructions are included with this kit, and technical support is available in real-time chat on the Edelbrock website or you can call the Tech Line at (800) 416-8628. (Note: Owners of the Gen IV 58X LS engine that plan to install a Pro-Flo 4 LS EFI Kit must order EFI Harness #35714.)
- Pro-Flo 4 IAC Ignition Harness
