1
of
5
Loading...
Magnaflow 93516 - Conv Univ 2.5 W/Air
$16400
$17327
Unit price
/
Unavailable
$9.27 off
DISCLAIMER: This Item Is Special Ordered, which may have cancellation or return restrictions. Please see our terms and conditions for more information.
Couldn't load pickup availability
0% APR or as low as $15/mo with Affirm. See if you qualify
PLEASE NOTE: Pictures may be repsentative of style, rather than the actual product. Read the description for more details.
Description
Description
Magnaflow 93516 - Conv Univ 2.5 W/Air
Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93516 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
- Your Trusted Source For EPA-Compliant Catalytic Converters
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
Air Tube Adaptable: Yes
Air Tube Count: 1
Body Height: 3.750 in.
Body Length: 12.000 in.
Body Material: Stainless Steel
Body Shape: Oval
Body Type: Clam Shell
Body Width: 6.375 in.
California Air Resources Board (CARB): No
Catalytic Converter Air Tube Adapter: Air Tube Pre-Installed
Catalytic Converter Format: Pre-Catalytic Converter and Main Catalytic Converter
Converter Body Size: OEM
Core Substrate Material: Ceramic
Emission: Non-California (49-State)
Finish: Stainless Steel
Heat Shield Attached: Yes
Heat Shield Included: Yes
Heat Shield Material: Aluminized Steel
Inlet Attachment Type: Weld-On
Inlet Diameter: 2.500 in.
Inlet Inside Diameter: 2.500 in.
Inlet Quantity: 1
Inlet Type: Weld-On
Main Piping Diameter: 2.500 in.
Material: Stainless Steel
Outlet Attachment Type: Weld-On
Outlet Diameter: 2.500 in.
Outlet Outside Diameter: 2.500 in.
Outlet Quantity: 1
Outlet Type: Weld-On
Overall Length: 16.000 in.
Oxygen Sensor Location: None
Recommended Use: Converter
Sensor Port Count: 0
Series: Standard Grade
Subtitles: Federal / EPA Compliant
Type: Universal
Universal Or Specific Fit: Universal
FITMENT DATA
Year
Make
Model
Submodel
Notes
1980
Cadillac
Eldorado
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
w/o Air Tube~Cutting And Welding Required During Installation
1980
Cadillac
Eldorado
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
w/o Air Tube~Cutting And Welding Required During Installation
1978 - 1981
Chevrolet
C10
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1978 - 1981
Chevrolet
C10
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1978 - 1979
Chevrolet
C10 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1978 - 1979
Chevrolet
C10 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1984 - 1985
Dodge
D100
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1986 - 1988
Dodge
D100
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1984 - 1985
Dodge
D100
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1986 - 1988
Dodge
D100
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1982 - 1988
Dodge
D150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1982 - 1988
Dodge
D150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
2002
Dodge
Ram 2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
2002
Dodge
Ram 2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1994 - 1995
Dodge
Ram 3500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Up To 15000 Gross Vehicle Weight~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
2002
Dodge
Ram 3500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Up To 9000 Gross Vehicle Weight~Cutting And Welding Required During Installation
1994 - 1995
Dodge
Ram 3500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Up To 15000 Gross Vehicle Weight~Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
2002
Dodge
Ram 3500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Up To 9000 Gross Vehicle Weight~Cutting And Welding Required During Installation
1984 - 1995
Ford
Bronco
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1995
Ford
Bronco
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-100 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-100 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-100 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-100 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-150 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-150 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-150 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-150 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1988 - 1995
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Front and Rear Replacement~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1988 - 1995
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Front and Rear Replacement~Cutting And Welding Required During Installation
1981 - 1982
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-150 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982, 1992 - 1995
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1991
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1981 - 1982, 1992 - 1995
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear Replacement Only One Required~Cutting And Welding Required During Installation
1984 - 1991
Ford
E-250 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1986
Ford
E-250 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1991
Ford
E-250 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1986
Ford
E-250 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1991
Ford
E-250 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-350 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-350 Econoline
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-350 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1984 - 1995
Ford
E-350 Econoline Club Wagon
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1991, 1996
Ford
F-150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1982 - 1992
Ford
F-150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1991, 1996
Ford
F-150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1982 - 1992
Ford
F-150
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
F-150
Eddie Bauer
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
F-150
Eddie Bauer
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
Lightning
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
Lightning
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
F-150
Special
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1995
Ford
F-150
Special
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
XL
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
XL
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
XLT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1993 - 1995
Ford
F-150
XLT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1988 - 1995
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1982 - 1986
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1987 - 1995
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation~To 8500 GVW
1988 - 1995
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1982 - 1986
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation
1987 - 1995
Ford
F-250
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front and Rear Replacement~Cutting And Welding Required During Installation~To 8500 GVW
1986 - 1987
Ford
F-350
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Front And Rear~Cutting And Welding Required During Installation
1984 - 1985, 1987 - 1995
Ford
F-350
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1986 - 1987
Ford
F-350
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Front And Rear~Cutting And Welding Required During Installation
1984 - 1985, 1987 - 1995
Ford
F-350
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1983 - 1984
Ford
Mustang
GT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Ford
Mustang
GT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1983 - 1984
Ford
Mustang
GT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Ford
Mustang
GT
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1984
Ford
Mustang
GT-350 20th Anniversary
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1984
Ford
Mustang
GT-350 20th Anniversary
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1984
Ford
Mustang
L
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1984
Ford
Mustang
L
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1984
Ford
Mustang
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Ford
Mustang
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1984
Ford
Mustang
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Ford
Mustang
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1978
GMC
C15
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1978
GMC
C15
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1978
GMC
C15 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1978
GMC
C15 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1979 - 1982
GMC
C1500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1979 - 1982
GMC
C1500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1979, 1981
GMC
C1500 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1979, 1981
GMC
C1500 Suburban
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1978
GMC
C25
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1978
GMC
C25
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1980
GMC
C2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1980
GMC
C2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1981 - 1982
GMC
K1500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1981 - 1982
GMC
K1500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1980
GMC
K2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1980
GMC
K2500
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Comanche
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Comanche
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991
Jeep
Comanche
Pioneer
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991
Jeep
Comanche
Pioneer
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Wrangler
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Wrangler
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Islander
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Islander
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Renegade
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Renegade
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Wrangler
S
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991 - 1992
Jeep
Wrangler
S
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Sahara
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1991
Jeep
Wrangler
Sahara
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1983 - 1984
Mercury
Capri
RS
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Mercury
Capri
RS
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1983 - 1984
Mercury
Capri
RS
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Cutting And Welding Required During Installation
1985
Mercury
Capri
RS
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Universal Federal [Exc. CA]~Front And Rear~Cutting And Welding Required During Installation
1994
Plymouth
Voyager
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
Base
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
LE
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
LE
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
LX
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
SE
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Installation In CA/CO/NY
Cutting And Welding Required During Installation
1994
Plymouth
Voyager
SE
Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-16.00 in.; Air Tube Preinstalled;Not Legal For Sale Or Use On Vehicles Registered In CA
Cutting And Welding Required During Installation
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
What are people saying about CSP?
Sale
SaleCorsa Performance
Corsa 16234 - 20-21 Chevrolet Corvette High Flow 300 Cell Cat Pipes
$1,937.99$2,132.00
Sale
Sale
Sale
SaleMagnaflow
Magnaflow 52186 - 10-14 Chevy Equinox / GMC Terrain 2.4L Direct Fit Catalytic Converter
$681.00$719.15
