Tick Performance Turbo Stage 1 Camshaft For 4.8L & 5.3L Engines - TPT001TR
Tick Performance tpt001tr
*some restrictions apply
- Part Number:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
This camshaft is NEW for 2015! Tick Performance proudly offers our Elite Series of Camshafts designed specifically for 4.8L & 5.3L Engines! Using the latest and greatest technology available, we've put together a complete line of Camshafts that are designed to meet every goal, from mild to wild. Our Elite Series of Camshafts are all manufactured by Cam Motion and are updated with a new version every time an advancement in valvetrain technology becomes available, so they're ALWAYS cutting-edge! Although we suggest measuring for piston-to-valve clearance during ANY camshaft install, every Elite Series Camshaft is designed to fit in a stock engine & stock heads with adequate clearance unless otherwise noted. These cams are designed to maximize power, reliability and valvetrain longevity.
Tick Performance Turbo Stage 1 Camshaft for 4.8L & 5.3L Engines
215/219 | .613"/.590" | LSA114+3
Designed for: All 4.8L & 5.3L Engines, including LR4, LM7, L59, LM4, & L33
Basic Operating RPM Range: 1800-6200
Expected Horsepower Gains: 50-60RWHP over the stock camshaft in a well-optimized setup (the higher the boost, the higher the gains!)
Aftermarket Headers Required: No
Stall Converter Required: Yes, 2400-2800RPM+
Rear Gear Upgrade Required: No (2.73 is the minimum suggested)
Works Well with Nitrous: No, designed for turbocharged applications
Will Pass Most Smog Emissions: Yes
Turbocharger Size Recommendation: Single 60mm-72mm turbochargers and twin 52mm-56mm turbochargers. Heavier vehicles (4,000LBS+) using single 72mm-76mm turbochargers or twin 58mm-62mm turbochargers should highly consider this camshaft for added low-end torque. 4.8L engines with larger single 72-76mm turbochargers and twin 58mm-62mm turbochargers should highly consider this camshaft due to their smaller displacement and shorter stroke.
Our Tick Performance Turbo Stage 1 Camshaft for 4.8 & 5.3 liter Engines is designed for those who want to gain a noticeable amount of power while retaining great street manners and a smooth idle. Perfect for single 60mm-72mm turbochargers and twin 52mm-56mm turbochargers! Those with 4.8L engines in lighter vehicles utilizing single 72mm-76mm turbochargers or twin 58mm-62mm turbochargers should highly consider this camshaft due to their smaller displacement and shorter stroke. Those with 5.3 liter engines in heavier vehicles (4000LBS+) utilizing single 72mm-76mm turbochargers or twin 58mm-62mm turbochargers should also highly consider this camshaft for added low end torque. This camshaft will not work in vehicles equipped with VVT or DOD. If your vehicle still has these systems, they will need to be deleted at the time of the camshaft install (parts sold separately.) We strongly suggest the use of our Tick/PAC Dual Valvesprings and hardened pushrods with this camshaft (sold separately.) Hundreds of hours were spent developing this camshaft to perform precisely the way we advertise, so as a result, changes to the LSA or any other specification of this camshaft are not available.