Skunk2 343-05-0100 - 06-11 Honda Civic Si Composite Cold Air Intake

Skunk2 - 343-05-0100

Cold Air Intake Kit; Incl. Air Filter/Tubing/Relocation Hardware For Battery/Eco/Fuse Box/Cooling System Reservoir Tank; Retains OEM Battery;

Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the '06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connector for use with Skunk2 throttle bodies or similar sold separately). The two-piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don't utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.

• Manufactured From Molded Polymer Plastic
• 3.5 in. ID Lower Tube
• 3.5 in. To 3.0 in. ID Upper Tube
• Connects To Factory Throttle Body
• 2 Piece Design; Incl. MAF Sensor Adapter
• Allows Compatibility w/Vehicles Utilizing Factory ECU
• Silicone Coupler
• Incl. Relocation Hardware
• Allows For OEM Battery to be retained
• Special Shaped Silicone Upper Radiator Hose Incl.