null
Mishimoto MMFF-SL-S010 - High-Performance -10AN Fuel Filter, Slim, 10-Micron Stainless-Steel Insert

Mishimoto MMFF-SL-S010 - High-Performance -10AN Fuel Filter, Slim, 10-Micron Stainless-Steel Insert

Mishimoto MMFF-SL-S010

$252.40 $240.99
Special Price: save $11.41
DEEPEST DISCOUNT APPLIED! NO COUPON NEEDED!
FREE SHIPPING ON ORDERS OVER $100!*
*some restrictions apply
Part Number:
MMFF-SL-S010
SKU:
MMFF-SL-S010
UPC:
840197708859
Availability:
Special Ordered - Not In Stock
DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.

Mishimoto - MMFF-SL-S010

High-Performance -10AN Fuel Filter, Slim, 10-Micron Stainless-Steel Insert

Mishimoto High-Performance -10AN Fuel Filter, Slim

Building a high-performance vehicle is an expensive endeavor that requires meticulous planning of every square inch and when horsepower is nearing the 4-digit mark, one oversight can cause catastrophic failure. Each vehicle system needs to be running at peak performance, but no other system can cause thousands of dollars of damage faster than fuel. An undersized or clogged fuel injector, pump, or filter can cause too little fuel flow to the engine, resulting in not only a loss of power, but also excessive heat. Even short periods of high cylinder temps can lead to detonation, melted pistons, or a seized engine and thousands of dollars in repairs. The best way to prevent fueling issues is to install the best quality components from tank to injector, and our Mishimoto high-performance fuel filters fit the bill. This fuel filter utilizes a slim extruded-aluminum body that measures just over 2-inch diameter to save space and make mounting easy. The high-flow filter cartridge and -10 ORB ports to provide up to 198 GPH (750 LPH). This fuel filter features an easy to replace cartridge-style insert in your choice of cellulose paper for petroleum-based fuels or welded stainless-steel for use with alcohol-based fuels. Both our cellulose and stainless-steel filters are available with a 10-micron rating for use between the pump and fuel rail, while the stainless-steel inserts are also available with a 100-micron rating for pre-pump filtering. Our filter inserts feature high-quality Viton O-rings and are rated to withstand up to 116 PSI for reliable performance on even the most demanding vehicles. Over 60 sq. in. of filter surface area protects valuable fuel pumps and injectors while allowing minimal pressure drop.

  • Slim 2.16" (55mm) diameter body for mounting versatility and light weight
  • Replaceable 100 and 10-micron filters for superior protection of vital fuel system components
  • Flows up to 198 GPH (750 LPH) for high-horsepower builds
  • Available with cellulous filter for petroleum-based fuels or reusable stainless-steel filter for alcohol-based fuels
  • -10 ORB inlets ensure adequate fuel flow and low pressure drop in all situations
  • Requires Mishimoto High-Performance Fuel Filter Brackets
  • Extruded and anodized aluminum body is lightweight and durable to withstand the rigors of racing
  • Rated to withstand up to 116 PSI working fuel pressure
  • High-quality Viton O-rings prevent leaking under high pressures
  • Over 60 sq. in. of surface area reduces risk of clogging and improves filtration
  • 10-micron filters recommended between pump and fuel rail
  • 100-micron filters recommended before fuel pump
  • Mishimoto Lifetime Warranty

SellingPoint01: Slim 2.16-in (55mm) diameter body for mounting versatility and light weight
SellingPoint02: Replaceable 100 and 10-micron filters for superior protection of vital fuel system components
SellingPoint03: Flows up to 198 GPH (750 LPH) for high-horsepower builds
SellingPoint04: Available with cellulous filter for petroleum-based fuels or reusable stainless-steel filter for alcohol-based fuels
SellingPoint05: -10 ORB inlets ensure adequate fuel flow and low pressure drop in all situations
SellingPoint06: Requires Mishimoto High-Performance Fuel Filter Brackets
SellingPoint07: Extruded and anodized aluminum body is lightweight and durable to withstand the rigors of racing
SellingPoint08: Rated to withstand up to 116 PSI working fuel pressure
SellingPoint09: High-quality Viton O-rings prevent leaking under high pressures
SellingPoint10: Over 60 sq. in. of surface area reduces risk of clogging and improves filtration
SellingPoint11: 10-micron filters recommended between pump and fuel rail
SellingPoint12: 100-micron filters recommended before fuel pump
SellingPoint13: Mishimoto Lifetime Warranty
SellingPoint14: N/A
SellingPoint15: N/A
Install Difficulty: 3
OptionLabel: 10-Micron Stainless-Steel Insert
TechSpec Inner Material: N/A
TechSpec Compatible Fluids: Cellulose Filter: Gasoline, Diesel--Stainless-Steel Filter: Gasoline, Diesel, Methanol, Ethanol
TechSpec Max Fluid Pressure (PSI): 116
TechSpec MaxFluidTemperature (F): N/A
TechSpec Inlet: -10 ORB
TechSpec Outlet: -10 ORB
TechSpec Fitting Angle: N/A
TechSpec Note: The--Mishimoto Lifetime Warranty does not cover replacement filters due to clogging or normal wear
TechSpec PurchaseIncludes: (1) Slim High-Performance Fuel Filter Body--(1) Cellulose or Stainless-Steel Filter Element--Mishimoto Lifetime Warranty