Injector Dynamics ID2000 High Flow Performance Fuel Injectors (Set of 8) - GM LS1/LS6 - 2000.60.14.14.8
Injector Dynamics 2000.60.14.14.8
*some restrictions apply
- Part Number:
- 2000.60.14.14.8
- SKU:
- 2000.60.14.14.8
- Availability:
- Special Ordered - Not In Stock
- DISCLAIMER - THIS ITEM IS A SPECIAL ORDERED PART:
- This item is Special Ordered - product is subject to the return and cancellation policy as seen in our terms and conditions. This may result in cancellation restrictions, or higher than normal restocking fees.
The ID2000 has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a smooth stoichiometric idle on E85, and it will do all this while maintaining strict linearity up to 95% duty cycle at 9000rpm.
With a pressure capability of 9 bar this injector can flow as much as 3700cc/min with excellent low pulsewidth linearity, and has the broadest operating range of any injector on the market.
Specifications:
- Nominal Flow Rate – 2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
- Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi)
- Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
- Electrical Connector – Denso
PLUG AND PLAY DATA!
Chrysler
ID2000 Chrysler Characterization Tables – Diablosport CMR – Updated 4-5-2011
COBB Subaru
ID2000 – Cobb Subaru Characterization Tables – 4-3-14
Ford
ID2000 – Ford Characterization Tables – 8-6-14
General Motors
ID2000 GM Characterization Tables – EFI Live – Updated 3-29-2011
ID2000 GM Characterization Tables – HP Tuners – Updated 3-29-2011
Mazda
3.9 Bar Returnless RX-8 Characterization Tables – Updated 4-5-2012
Motec M1
ID2000 Injector Cal 300-600 kPa.m1cal – Updated 12-6-2013
ID2000 Injector Cal 300-600 kPa Alcohol.m1cal – Updated 12-6-2013
