Gforce Engineering Outlaw Axles (Pair) - 2004-2007 Cadillac CTS-V
Gforce Engineering CTS10100A
That's right, Gforce Engineering now backs our axles with a Lifetime warranty.
We are so confident in our products and the fact that we very rarely get anything back for warranty that we decided to go to a Lifetime warranty. The Lifetime warranty is for the original purchaser of the product, if the product is transferred to another owner then it reverts back to a 2 year warranty from date of original purchase.
Our 1000hp axles are made for the guys that are really cranking out big power.
Our 1000hp axles and stubs are made from a high alloy steel similar to 300m but with added materials to give it better torsional twisting abilities then 300m.
You wont find a stronger axle on the market!
GM developed the anti wheel-hop technology years ago and we have refined it to eliminate wheel with our axles. This has been very successful for us in the GTO, CTS-V, G8 and Camaro markets.
Our proven anti wheel-hop technology in our axles ensures you get rid of your wheel hop when bolting on a set of Gforce axles.
The left hand axle is a regular diameter while the right hand axle is an increased diameter axle. The design and material we use is what stops the wheel hop.
Our 1000hp axles get our custom built cv joints that are built in house and use 4340 heavy duty cv cages and high alloy center races, we then heat treat them to our special aerospace heat treat process that you wont find any where else in the industry.
We can also up-grade the cv joints to use our super duty 300m polished cages, you wont find this feature any where but from Gforce Engineering, see options below.
Another feature you will find in Gforce axles are our 28 spline axles and cv joints. If your comparing 28 spline to 30 spline then you have to consider this.
A 28 spline cv center star has more material then a 30 spline cv joint. Thus making the 28 spline cv joint stronger by design.
After testing and analyzing the 30 spline cv joints on the market we found they were the same as a 28 spline cv joint except the center star was opened up to 30 spline. Opening up the center to 30 spline makes the center star weaker.
The only way to make a larger spline cv is to go with a larger cv joint that is designed for a larger axle as we have done with our 33 spline outlaw 1800hp axles. (Call for details)
We have had excellent luck with our 28 spline axles and cv joints due to the fact that we use a high alloy material similar to 300m but with better torsional twisting properties.
This is another reason Gforce axles carry a Lifetime Warranty.
We only use aircraft grade certified material that we get from a 100 year old US steel mill for all our products, not some overseas outfit like the competition uses. We know exactly what we get every time and you should know as well.
We machine our axles and most all our products in house, this gives us the ability to test fit and inspect every part that comes off our machines.
It also allows us to incorporate on the fly design changes as parts are being machined, this ensures you as the customer are getting the most advanced products you can get.
We design our axles not to break!
That is why you don’t see people breaking our axles.
The strongest axle design is one that provides a constant twist for the entire length of the axle.
We design and manufacture our axles with the best ideal diameter between the splines to give the axle a constant twisting rate the entire length of the axle. If you make the axle larger or the same size as the splined end then it concentrates all the twisting loads directly into the splined area and doesn’t allow it to properly twist.
It would be much easier for us to make the axle the same diameter throughout and would require less machine work but we go the extra mile to ensure you get the strongest axle on the market.
By using our innovative and patent pending bolt-together inner axle stub design, our axle packages are totally modular. All the parts between our 4340 axles and our 300m axles are interchangeable, every single piece! If you decide you ever want to up-grade to our 300m inner stubs or our 35 spline stubs down the road, you only have to buy just the stub piece instead of an entire stub assembly. Same thing goes if you happen to damage an inner stub, it can be replaced for about $150. instead of buying an entire stub again.
How strong is our bolt together stub design you say? Very strong, we have our stubs in 1000+hp cars all over the world.
Our axles come coated in an aerospace e-coat black backed on finish to protect your parts from the harsh elements. You won’t find this special corrosion coating anywhere but on Gforce products.
Gforce axles have the best track record against breakage hands down and come backed with the best in the industry Lifetime Warranty.
We do all design work in house and use state of the art 3-D CAD systems to ensure you get the best part and best possible fit every time.
We also do all our own machine work in house as well on state of the art CNC machines.