Pay over time
COMP Cams CK54-311-11 - Stage 1 LST Max Horsepower Solid Roller Cam Kit for LS 3-Bolt Engines

COMP Cams CK54-311-11 - Stage 1 LST Max Horsepower Solid Roller Cam Kit for LS 3-Bolt Engines

COMP Cams CK54-311-11

$1,359.99
Part Number:
CK54-311-11
SKU:
COMP-CK54-311-11
UPC:
036584387374
Order Terms:
Due to supply chain related delays this product is special order and cannot be cancelled. Some products are taking an extended period to ship, so it is recommend to email us to ask about stock before ordering. Do not order unless you can wait.

COMP Cams - CK54-311-11

Stage 1 LST Max Horsepower Solid Roller Cam Kit for LS 3-Bolt Engines

The Stage 1 Max Horsepower Solid Roller LS Cam Kit provides excellent HP/torque average from 3,000-7,000 with factory relief pistons. Includes XD-A pushrods, springs, retainers, locks, spring seats and seals.

Cam Type: Solid Roller
Basic Operating RPM Range: 2,800-7,500
Intake Duration at .050 Inch Lift: 234
Exhaust Duration at .050 inch Lift: 248
Advertised Intake Duration: 274
Advertised Exhaust Duration: 288
Lobe Separation: 111.5
Intake Valve Lift: 0.672
Exhaust Valve Lift: 0.668
Lifters Included: No
Valve Springs Included: Yes
Assembly Lubricant Included: No
Camshaft Gear Attachment: 3-Bolt
Camshaft Material: Billet Steel
Lifter Type: Solid Roller
Retainers Included: Yes
Locks Included: Yes
Pushrods Included: Yes
Gaskets Included: No
Engine Family: GM LS GEN III/IV 3-Bolt 8 Cylinder (1997-2015)
Stage: 1
Timing Set Included: No
Valve Seals Included: Yes
Valve Spring Seats Included: Yes
Grind Number: 274LGW11
Estimated Horsepower Gain with Kit: 82
Recommended Cold Lash Setting - Intake: 0.007
Recommended Cold Lash Setting - Exhaust: 0.009
Recommended Upgraded Stock Rocker Arms: 1477-16 (LS1), 1478-16 (LS3), 1479-16 (LS7)
Recommended Max-Lift BSR Shaft Rocker System: 1981-16 (LS1), 1982-16 (LS3), 1983-16 (LS7)
Recommended Cam Install Kit for LS7: 5622
Amazon ASIN: B07MM2LDWD
C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, but must be a race/competition only vehicle.
C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, but must meet tailpipe emission standards for year of vehicle.
C.A.R.B. Exempt for On-Road Vehicles?: No
C.A.R.B. Exemption Reason: N/A
C.A.R.B. E.O. Number: N/A
Kit Type: CK-Kit
Camshaft Series: Low Shock Technology
Usage: Street/Strip

Customers Also Viewed

Subscribe to our newsletter