{"title":"DSX Tuning","description":"","products":[{"product_id":"gm-flex-fuel-sensor-with-pigtail","title":"DSX GM Flex Fuel Sensor with Pigtail","description":"\u003cp\u003e\u003cinline\u003eThis GM flex fuel sensor measures the ethanol-gasoline ratio of the fuel being used. In order to adjust ignition timing and the fuel quantity to be injected, the engine management system requires information about the percentage of ethanol in the fuel.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe flex fuel sensor uses quick-connect style fuel connections, an incoming fuel and an outgoing fuel connection. All fuel passes through the sensor before continuing on to the fuel rails. The flex fuel sensor measures the the fuel \/ alcohol content, and sends an electrical signal to the engine control module (ECM) to indicate ethanol percentage.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/inline\u003e\u003cspan\u003e\u003cinline\u003e\u003cb\u003eIncludes: \u003c\/b\u003e\u003cbr\u003eFemale mating connector \/ pigtail.\u003c\/inline\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e DSX manufactured components are covered against defects in materials and workmanship for the life of the product. GM sensors are warrantied for 90 days. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"E40","offer_id":51003537621270,"sku":"DSX-GMFLEXFUELSENSOR-E40","price":183.14,"currency_code":"USD","in_stock":true},{"title":"E38\/E67\/E92","offer_id":51003537654038,"sku":"DSX-GMFLEXFUELSENSOR-E38\/E67\/E92","price":183.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/GMFLEXFUELSENSOR.jpg?v=1769897856"},{"product_id":"dsx-flex-fuel-kit-for-2010-camaro-ss-1le","title":"DSX Flex Fuel Kit for 2010-2015 Camaro SS \/ 1LE \/ Z28","description":"\u003cdiv\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.This kit features 100% clip together plumbing... There is ZERO need for wrenches!\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eTHIS KIT IS INTENDED TO INSTALL ON THE FUEL LINE WHERE IT COMES UP NEAR THE PASSENGER SIDE STRUT TOWER.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003537686806,"sku":"DSX-SSFFK","price":277.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-13_9cfd13ba-e1d6-4994-9eb4-5ec8ded96053.jpg?v=1769897857"},{"product_id":"dsx-flex-fuel-kit-for-2014-ss-sedan","title":"DSX Flex Fuel Kit for 2014+ SS Sedan","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003537719574,"sku":"DSX-SSSEDANFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-02_3f8bf98a-d806-41e6-8655-261e10594273.jpg?v=1769897858"},{"product_id":"dsx-flex-fuel-kit-for-2008-2009-g8-gt-gxp","title":"DSX Flex Fuel Kit for 2008-2009 G8 GT \u0026 GXP","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003537752342,"sku":"DSX-G8FFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-02_1391ecaa-d65c-46af-8acc-7bfb40a27f54.jpg?v=1769897859"},{"product_id":"dsx-flex-fuel-kit-for-2005-2013-c6-corvette-incl-z06","title":"DSX Flex Fuel Kit for 2005-2013 C6 Corvette (Incl Z06)","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cinline\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cb\u003eCOMPATIBILITY NOTE:\u003c\/b\u003e\u003c\/inline\u003e\u003cspan\u003e\u003cinline\u003e If you have a 2005 C6 Corvette, You will need to change the option above on the options tab. The 2005 C6 ECU varies from the 2006-2013 C6 Corvette.\u003c\/inline\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eIf you need the OEM rivets to reattach side skirts (ZR1 style), they can be purchased \u003ca href=\"https:\/\/dsxtuning.com\/collections\/gm-parts\/products\/gm-rivet\"\u003ehere\u003c\/a\u003e. We recommend at least five.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003e DSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"2005 C6 E40","offer_id":51003537785110,"sku":"DSX-C6FFK-05","price":328.86,"currency_code":"USD","in_stock":true},{"title":"2006-2013 C6 (Incl Z06) E38","offer_id":51003537817878,"sku":"DSX-C6FFK-06ON","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-04.jpg?v=1769897860"},{"product_id":"dsx-flex-fuel-kit-for-2006-2009-trailblazer-ss","title":"DSX Flex Fuel Kit for Gen IV GM Truck","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003ePlease choose your ECM from the drop down menu. For reference, most Gen IV trucks use the E38. The 2006 Trailblazer SS uses the E40, while the 2007-2009 Trailblazer SS uses the E67.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"E40","offer_id":51003537850646,"sku":"DSX-TRUCKFFK-E40","price":328.86,"currency_code":"USD","in_stock":true},{"title":"E38","offer_id":51003537883414,"sku":"DSX-TRUCKFFK-E38","price":328.86,"currency_code":"USD","in_stock":true},{"title":"E67","offer_id":51003537916182,"sku":"DSX-TRUCKFFK-E67","price":328.86,"currency_code":"USD","in_stock":true},{"title":"E78","offer_id":51003537948950,"sku":"DSX-TRUCKFFK-E78","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-05.jpg?v=1769897861"},{"product_id":"dsx-flex-fuel-kit-for-2009-2014-cts-v-1","title":"DSX Flex Fuel Kit for 2009-2015 CTS-V","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538080022,"sku":"DSX-CTSVFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-10.jpg?v=1769897862"},{"product_id":"dsx-flex-fuel-kit-for-2014-c7-corvette-z06","title":"DSX Flex Fuel Kit for 2015+ C7 Corvette Z06","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003eIf you need the OEM rivets to reattach side skirts, they can be purchased \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/dsxtuning.com\/collections\/gm-parts\/products\/gm-rivet\"\u003ehere\u003c\/a\u003e\u003cspan\u003e. We recommend at least five.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538112790,"sku":"DSX-C7ZFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-09.jpg?v=1769897863"},{"product_id":"dsx-flex-fuel-kit-for-12-15-camaro-zl1","title":"DSX Flex Fuel Kit for 2012-2015 Camaro ZL1","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003cbr\u003e\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538145558,"sku":"DSX-ZL1FFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-07.jpg?v=1769897863"},{"product_id":"dsx-flex-fuel-kit-for-2014-c7-corvette-stingray","title":"DSX Flex Fuel Kit for 2014+ C7 Corvette Stingray","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003eIf you need the OEM rivets to reattach side skirts, they can be purchased \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/dsxtuning.com\/collections\/gm-parts\/products\/gm-rivet\"\u003ehere\u003c\/a\u003e\u003cspan\u003e. We recommend at least five.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538178326,"sku":"DSX-C7SRFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-11.jpg?v=1769897864"},{"product_id":"dsx-flex-fuel-kit-for-2009-2013-c6-corvette-zr1","title":"DSX Flex Fuel Kit for 2009-2013 C6 Corvette ZR1","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003eIf you need the OEM rivets to reattach side skirts, they can be purchased \u003ca href=\"https:\/\/dsxtuning.com\/collections\/gm-parts\/products\/gm-rivet\"\u003ehere\u003c\/a\u003e. We recommend at least five.\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538211094,"sku":"DSX-C6ZRFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-06_6870747b-b9a7-4581-9c3d-5471360023c2.jpg?v=1769897865"},{"product_id":"dsx-flex-fuel-kit-for-16-camaro-ss","title":"DSX Flex Fuel Kit for 2016+ Camaro SS","description":"\u003cdiv\u003e\n\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune. \u003c\/span\u003e\u003cspan\u003eThis kit features 100% clip together plumbing... There is ZERO need for wrenches!\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThis kit offers a \u003cstrong\u003ecrimped and pressure tested PTFE line\u003c\/strong\u003e to replace the factory over-the-engine line. This is a 8AN line with 6AN connections to allow true flow of a 3\/8\" line (the ID of the hose end does not get significantly smaller when in the hose). This kit is available without a replacement line, and the sensor still installs at the firewall while reusing the factory fuel line, but the factory line may have a small kink because of the extended connection point.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Yes","offer_id":51003538243862,"sku":"DSX-6GCFFK-PTFE","price":405.36,"currency_code":"USD","in_stock":true},{"title":"No (-$125)","offer_id":51003538276630,"sku":"DSX-6GCFFK","price":277.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-01.jpg?v=1769897866"},{"product_id":"iat-baro-breakout-harness-for-14-c7-corvette-stingray","title":"DSX IAT \/ Baro Breakout Harness for Gen V","description":"\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe DSX IAT\/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It also serves to break out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. IAT sensor and 3 bar MAP sensor can be included. This harness is entirely plug and play... No splicing of any factory wiring harnesses required. If you are ordering the 3 bar MAP sensor, you will install that sensor in your intake manifold, and then install your stock black MAP sensor into the breakout harness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSensors are included by default.  Select above to remove them from the harness. Sensors have gone up significantly in cost from GM, and unfortunately the cost of the sensors reflects this.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e DSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Yes","offer_id":51003538309398,"sku":"DSX-C7IATBARO-SENSORS","price":236.57,"currency_code":"USD","in_stock":true},{"title":"No (-$120)","offer_id":51003538342166,"sku":"DSX-C7IATBARO","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_94e9b541-c16a-45a4-8cca-ff48c0c73888.jpg?v=1769897867"},{"product_id":"c7-z06-baro-breakout-harness","title":"DSX Baro Breakout Harness for Gen V","description":"\u003cp\u003e\u003cspan\u003eThe DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. This harness is entirely plug and play... No splicing of any factory wiring harnesses required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA baro sensor (one bar) is not included by default.  Select above to include one with the harness. The cost of sensors from GM has gone up significantly, and so the pricing reflects this increase from GM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"No","offer_id":51003538374934,"sku":"DSX-C7Z06BARO","price":90.86,"currency_code":"USD","in_stock":true},{"title":"Yes  - 1 Bar (+$30)","offer_id":51003538407702,"sku":"DSX-C7Z06BARO-1BAR","price":124.86,"currency_code":"USD","in_stock":true},{"title":"Yes  - 3 Bar (+$30)","offer_id":51003538440470,"sku":"DSX-C7Z06BARO-3BAR","price":134.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_bf4a7a81-1d3c-4aec-8526-e99ba2155022.jpg?v=1769897868"},{"product_id":"auxiliary-fuel-pump-kit-for-2009-2014-cts-v","title":"DSX Auxiliary Fuel Pump Kit for 2009-2015 CTS-V","description":"\u003cdiv\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eThe DSX Tuning Aux Pump Kit is the \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eoriginal\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 8psi (157kPa) and shuts off when falling below 6psi (144kPa).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose). \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"10-Sep \/ GSL392 (255lph)","offer_id":51003538473238,"sku":"DSX-CTSVAFPK-EARLY-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"10-Sep \/ GSL396 (320lph) [+$50]","offer_id":51003538506006,"sku":"DSX-CTSVAFPK-EARLY-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"15-Nov \/ GSL392 (255lph)","offer_id":51003538538774,"sku":"DSX-CTSVAFPK-LATE-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"15-Nov \/ GSL396 (320lph) [+$50]","offer_id":51003538571542,"sku":"DSX-CTSVAFPK-LATE-396","price":1111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/09-15-CTS-V.jpg?v=1769897869"},{"product_id":"auxiliary-fuel-pump-kit-for-2012-2015-camaro-zl1","title":"DSX Auxiliary Fuel Pump Kit for 2010-2015 Camaro (SS, ZL1, Z28, 1LE)","description":"\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 8psi (157kPa) and shuts off when falling below 6psi (144kPa).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no backing nuts to fumble with tightening, and there are no plastic clips to melt or fail.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"157kPa (~8psi) \/ GSL392 (255lph)","offer_id":51003538604310,"sku":"DSX-ZL1AFPK-H-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"157kPa (~8psi) \/ GSL396 (320lph) [+$50]","offer_id":51003538637078,"sku":"DSX-ZL1AFPK-H-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"114kPa (~2psi) \/ GSL392 (255lph)","offer_id":51003538669846,"sku":"DSX-ZL1AFPK-L-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"114kPa (~2psi) \/ GSL396 (320lph) [+$50]","offer_id":51003538702614,"sku":"DSX-ZL1AFPK-H-396","price":1111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/10-15-Camaro.jpg?v=1769897870"},{"product_id":"auxiliary-fuel-pump-kit-for-2009-2013-corvette-zr1","title":"DSX Auxiliary Fuel Pump Kit for 2006-2013 Corvette","description":"\u003ch3\u003e\u003cspan style=\"color: #ff2a00;\"\u003ePLEASE NOTE YOU MUST USE A LS9 MAP SENSOR WITH THIS KIT! IF YOU ARE PUTTING THIS ON A NON-ZR1, YOU ARE LIMITED TO 58PSI RAIL PRESSURE.\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 8psi (157kPa) and shuts off when falling below 6psi (144kPa).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no backing nuts to fumble with tightening, and there are no plastic clips to melt or fail.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"157kPa (~8psi - ZR1) \/ GSL392 (255lph)","offer_id":51003538735382,"sku":"DSX-C6AUXFUEL-H-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"157kPa (~8psi - ZR1) \/ GSL396 (320lph) [+$50]","offer_id":51003538768150,"sku":"DSX-C6AUXFUEL-H-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"114kPa (~2psi - non-ZR1) \/ GSL392 (255lph)","offer_id":51003538800918,"sku":"DSX-C6AUXFUEL-L-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"114kPa (~2psi - non-ZR1) \/ GSL396 (320lph) [+$50]","offer_id":51003538833686,"sku":"DSX-C6AUXFUEL-L-396","price":1111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/09-13-ZR1.jpg?v=1769897872"},{"product_id":"flex-fuel-kit-for-2005-2006-gto","title":"DSX Flex Fuel Kit for 2005-2006 GTO","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538866454,"sku":"DSX-GTOFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-02.jpg?v=1769897873"},{"product_id":"flex-fuel-harness","title":"DSX Flex Fuel Harness","description":"\u003cp\u003eThis is a custom made flex fuel harness.  In the description, please specify the length of wire requested from the ignition coil to the flex fuel sensor, and the length of wire requested from the ignition coil to the ECM.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538899222,"sku":"DSX-FFHARNESS","price":168.57,"currency_code":"USD","in_stock":true}]},{"product_id":"flex-fuel-sensor-with-custom-harness","title":"DSX Flex Fuel Sensor with Custom Harness","description":"\u003cp\u003eThis is a GM Flex Fuel sensor with a custom made harness. This is ideal for people who don't need the plumbing side of things because they're using an aftermarket fuel system or just want to do things their own way. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eWhen checking out, select which ECM you have from the drop down below (most will fall in the E38\/E67\/E92 category). In the notes for your order, please specify the length of wire you need from the nearest ignition coil to the sensor (wherever you'll put it), and length of wire from the ignition coil to the ECM. \u003cspan style=\"color: #ff2a00;\"\u003eIF YOU DO NOT LIST ACTUAL DIMENSIONS AND INSTEAD JUST LIST THE APPLICATION, WE WILL CANCEL YOUR ORDER!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003eGM sensors are warrantied for 90 days. \u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"E38\/E67\/E92","offer_id":51003538931990,"sku":"DSX-FFK-HARNESS-E38","price":236.57,"currency_code":"USD","in_stock":true},{"title":"E40","offer_id":51003538964758,"sku":"DSX-FFK-HARNESS-E40","price":236.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_a005ca80-f37e-4fcd-afa4-db2a0825a10f.jpg?v=1769897875"},{"product_id":"gm-fuel-line-push-connect-coupler","title":"DSX GM Push Connect Coupler","description":"\u003cp\u003eThese DSX original fittings are made from 6061 and then anodized black and laser engraved. They make connecting two male GM push connect ends a snap. Unlike other fittings out there that use difficult to deal with backing nuts, this uses stainless steel snap clips inside as well as a double fluorosilicone o-ring seal on each end to provide the easiest installation coupled with leak free operation on even the worst of fluids.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe fitting measures 2.60\" long and is 0.85\" in outside diameter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003538997526,"sku":"DSX-FPC-FPC","price":71.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/Push-Connector-Coupler---Side_c0b0ddd4-c0ef-4b38-856f-3a603caf6cbf.jpg?v=1769897875"},{"product_id":"gm-push-connect-to-6an","title":"DSX GM Push Connect to 6AN","description":"\u003cp\u003e\u003cspan\u003eThese DSX original fittings are made from 6061 and then anodized black and laser engraved. T\u003c\/span\u003ehey make going from push connect to 6AN a snap. Unlike other fittings out there that use difficult to deal with backing nuts, this uses a \u003cspan\u003estainless steel snap clip\u003c\/span\u003e inside as well as a double fluorosilicone o-ring seal on each end to provide the easiest installation coupled with leak free operation on even the worst fluids.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe fitting measures 1.80\" long and is 0.85\" in outside diameter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539063062,"sku":"DSX-6ANPC","price":61.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/6AN-Push-Connect---Side.jpg?v=1769897876"},{"product_id":"auxiliary-fuel-pump-kit-for-2016-camaro","title":"DSX Auxiliary Fuel Pump Kit for 2016+ Camaro","description":"\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 3psi (121kPa) and shuts off when falling below 0psi (104kPa).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no backing nuts to fumble with tightening, and there are no plastic clips to melt or fail.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"LS9 MAP (3-wire 3 bar) \/ GSL392 (255lph)","offer_id":51003539095830,"sku":"DSX-CAM6AFPK-LS9-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"LS9 MAP (3-wire 3 bar) \/ GSL396 (320lph) [+$50]","offer_id":51003539128598,"sku":"DSX-CAM6AFPK-LS9-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"LT4 MAP (4-wire 4 bar) \/ GSL392 (255lph)","offer_id":51003539161366,"sku":"DSX-CAM6AFPK-LT4-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"LT4 MAP (4-wire 4 bar) \/ GSL396 (320lph) [+$50]","offer_id":51003539194134,"sku":"DSX-CAM6AFPK-LT4-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"CAN (Plugs into parking brake) \/ GSL392 (255lph)","offer_id":51003539226902,"sku":"DSX-CAM6AFPK-CAN-392","price":1470.0,"currency_code":"USD","in_stock":true},{"title":"CAN (Plugs into parking brake) \/ GSL396 (320lph) [+$50]","offer_id":51003539259670,"sku":"DSX-CAM6AFPK-CAN-396","price":1522.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/16_-Camaro.jpg?v=1769897877"},{"product_id":"flex-fuel-kit-for-2017-zl1","title":"DSX Flex Fuel Kit for 2017+ Camaro ZL1","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539292438,"sku":"DSX-CAM6ZL1FFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-03_a4cc0ad4-ccfe-4c61-a58c-d2df1ea02bbc.jpg?v=1769897878"},{"product_id":"lt4-blower-coolant-blocks","title":"DSX LT4 Blower Coolant Manifolds","description":"\u003cp\u003eThese CNC'd 6061 aluminum blocks allow you to eliminate the factory blower coolant manifold on the LT4 supercharger and feed each intercooler brick individually. The blocks convert the inlet and outlet of each brick to a 12 AN fitting allowing end users to run significantly larger lines for the system than stock. They come anodized black.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese include a small bracket intended to lower the boost control solenoid down out of the way. These also require using a regular hose on the vacuum line connection of the snout on the driver's side.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539325206,"sku":"DSX-LT4BB","price":265.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/Dual-Manifold-1.jpg?v=1769897879"},{"product_id":"auxiliary-fuel-pump-kit-for-2014-corvette","title":"DSX Auxiliary Fuel Pump Kit for 2014+ Corvette","description":"\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the original and budget friendly alternative to big fuel supply with a simple installation. There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line. With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cbr\u003e\u003cstrong\u003eThe heart of the C7 system is a DSX Tuning proprietary PnP controller that uses CAN data.\u003c\/strong\u003e There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes CAN data from the parking brake jumper to trigger the pump. The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring. The pump is activated any time the ECM commands 500kPa or higher fuel pressure and features a soft start function meaning the pump is not immediately commanded to full duty cycle and consequently results in a much smaller spike in fuel pressure. The controller also features a built in priming\/purge function: simply key the vehicle on (but don't start the engine) and push the gas pedal. The pump will run proportional to how hard you push the gas pedal! If you need to pump fuel out of the tank or just want to purge the lines, this makes it easy. The controller is also programmed to disable the pump driver if the parking brake is engaging or disengaging so the factory wiring is not overloaded. These are made with all solid state electronics that are self protected meaning there are no fuses, mechanical switches, or relays that can fail from vibration or repeated arcing (this is what happens to a Hobbs switch or relay over time). What's more is there is no need to run any wiring from the engine bay since everything is contained within the rear driver's fender. This is the most advanced controller available and allows the tuner to activate the pump exactly when needed by modifying the pressure modes in the ECM. \u003cbr\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features PTFE lined smooth bore crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The pre-filter is a custom made 74 micron stainless filter exclusively for use with these pumps to minimize potential leak points, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no plastic clips that can melt or fail, and there are no backing nuts to fumble around with trying to tighten. The fitting is retained using a stainless steel clip.\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1925\/2773\/files\/C7_Aux_Pump_Settings.htt?v=1702581617\"\u003eDownload the HPT template applicator here for the fuel system settings.\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"GSL392 (255lph)","offer_id":51003539357974,"sku":"DSX-C7AUXFUEL-392","price":1054.29,"currency_code":"USD","in_stock":true},{"title":"GSL396 (320lph) [+$50]","offer_id":51003539390742,"sku":"DSX-C7AUXFUEL-396","price":1105.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/C7-Pump-Kit_c44b7b12-fa6f-4009-a319-cbab4226b270.jpg?v=1769897880"},{"product_id":"drill-tap-for-aux-pump-kit","title":"DSX Drill \u0026 Tap for Aux Pump Kit","description":"\u003cp\u003eThis is the 37\/64\" drill bit and 3\/8-18 NPTF tap intended for installation of the aux pump kits.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539423510,"sku":"DSX-D\u0026T","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/Drill-And-Tap_22c6dd1b-0614-4b04-b7ba-133130175614.jpg?v=1769897881"},{"product_id":"auxiliary-fuel-pump-kit-for-2014-2017-chevy-ss","title":"DSX Auxiliary Fuel Pump Kit for 2014-2017 Chevy SS","description":"\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 2psi (114kPa) and shuts off when falling below 0psi.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no backing nuts to fumble with tightening, and there are no plastic clips to melt or fail.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"GSL392 (255lph)","offer_id":51003539456278,"sku":"DSX-SSAFPK-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"GSL396 (320lph) [+$50]","offer_id":51003539489046,"sku":"DSX-SSAFPK-396","price":1111.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/14-17-Chevy-SS_315a11ec-f1ba-4bb8-8b90-0d20ced2e000.jpg?v=1769897883"},{"product_id":"gen-v-lt1-evap-extension-harness","title":"DSX Gen V LT1 Evap Extension Harness","description":"\u003cp\u003eThis harness is a 27\" extension for the factory evap connector in the engine bay. It is intended to facilitate easier installation of LT4 blowers on LT1 engines in the 2016+ Camaro or 2014+ Corvette (or any other application using the new connector).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are crimped using an OEM crimper and die to ensure a lasting connection. This is 100% plug and play. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539521814,"sku":"DSX-LT1-EVAP","price":61.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_b29352ac-23f2-46fd-8989-dbb96eb88aa9.jpg?v=1769897884"},{"product_id":"lt1-to-lt4-tmap-conversion-harness","title":"DSX LT1 to LT4 TMAP Conversion Harness","description":"\u003cp\u003eThis harness is intended to convert from the LT1 style 3-wire MAP sensor to the LT4 4-wire TMAP. The harness connects to the MAF and breaks out the IAT wire in addition to adapting the MAP sensor connection. Combine this with the \u003ca href=\"https:\/\/dsxtuning.com\/collections\/breakout-harnesses\/products\/gen-v-lt1-evap-extension-harness\"\u003eDSX Evap Extension Harness\u003c\/a\u003e for a complete plug and play LT4 blower conversion.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe LT4 MAP sensor can be included for $40.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"No","offer_id":51003539587350,"sku":"DSX-LT1-TMAP-NO","price":217.14,"currency_code":"USD","in_stock":true},{"title":"Yes (+$40.00)","offer_id":51003539620118,"sku":"DSX-LT1-TMAP-YES","price":256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_15df61f1-4739-4fe7-97d6-2235acc8c512.jpg?v=1769897884"},{"product_id":"gm-push-connect-to-6an-threaded","title":"DSX GM Push Connect to 6AN - Threaded","description":"\u003cp\u003e\u003cspan\u003eThese DSX original fittings are made from 6061 and then anodized black and laser engraved. This fitting features a backing nut instead of a steel retainer clip to allow easier removal from a flex fuel sensor (because you cannot fit a disconnect tool with a true push on fitting). Like other fittings, this uses\u003c\/span\u003e a double fluorosilicone o-ring seal to provide leak free operation on even the worst fluids.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe fitting measures 1.80\" long and is 0.80\" in outside diameter.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003539751190,"sku":"DSX-6ANBN","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/6AN-Push-Connect---Backing-Nut.jpg?v=1769897886"},{"product_id":"dsx-tuning-walbro-gsl392-prefilter","title":"DSX Tuning Walbro GSL392\/396 Prefilter","description":"\u003cp\u003eThis is the prefilter used in the DSX Tuning aux pump systems. It features a 74 micron stainless filter element, fluorosilicone o-rings, and screws directly into the Walbro GSL392 pump. \u003c\/p\u003e\n\u003cp\u003eAn aluminum crush washer is included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"6AN","offer_id":51003539783958,"sku":"DSX-FILTER-1","price":134.57,"currency_code":"USD","in_stock":true},{"title":"3\/8\" Push Connect","offer_id":51003539816726,"sku":"DSX-FILTER-2","price":134.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/GSL392-Prefileter_0bb582e9-c764-4b87-9212-a0184a13ed40.jpg?v=1769897886"},{"product_id":"auxiliary-fuel-pump-kit-for-2016-cts-v","title":"DSX Auxiliary Fuel Pump Kit for 2016+ CTS-V","description":"\u003cdiv\u003eThe DSX Tuning Aux Pump Kit is the \u003cstrong\u003eoriginal\u003c\/strong\u003e and budget friendly alternative to big fuel supply with a simple installation.  There's no need to get inside of the factory fuel tank, as this system taps into the tank and uses an external pump that ties back into the factory feed line.  With the help of the factory fuel pressure control module, the ECM always knows what your fuel pressure is even when the aux pump kicks on to give a huge boost in pressure and flow.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe heart of the system is a DSX Tuning proprietary PnP controller that plugs into the MAP sensor.\u003c\/strong\u003e\u003cspan\u003e  There's no need to tap vacuum lines or install a Hobbs switch as the DSX Tuning controller utilizes the electrical signal from the MAP to trigger the pump.  The controller is incorporated into an easy to install harness with minimal connections to ensure the end user doesn't have to do any wiring.  The pump is activated at 3psi (121kPa) and shuts off when falling below 0psi (104kPa).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eThe system features smooth bore PTFE coated crimped fuel lines to ensure leak free operation and corrosion resistance against ethanol for the life of the vehicle as well as inhibit any fuel odor from permeating through the lines.\u003c\/strong\u003e  These lines are pressure tested by the manufacturer to verify against defects, so you can be sure that what you receive is the highest quality and rated for any fuel you will run through it. \u003cspan\u003eThese lines are 8AN in size but use 6AN connections to allow full flow even through the fitting itself (typical 6AN lines and ends are significantly smaller internally when inserted in the hose).\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eDon't be fooled by lower quality push lock, screw together, or plain braided hoses! DSX Tuning is committed to providing purpose built products and not repurposed pieces or a collection of off the shelf components bundled together. The filter is a custom made 74 micron filter exclusively for use with these pumps, and the one piece billet tee fitting is a true push connect piece made exclusively for this application. There are no backing nuts to fumble with tightening, and there are no plastic clips to melt or fail.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eThe pump is mounted under the vehicle, and all mounting hardware is supplied so the user has a 100% complete kit to perform the installation. These systems now feature an original DSX designed and manufactured push connect tee to simplify the installation and reduce potential leak points. Drilling the fuel tank is required for installation, and an available drill and tap is available for an extra charge. Don't settle for imitations!\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003eInstallation time is roughly two hours and can be done on jack stands.  It is recommended to have a low level of fuel in the tank before installation.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cinline\u003eThis kit can be installed prior to tuning, but in order to take full advantage you will need \u003ca href=\"http:\/\/www.hptuners.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e tuning software and access to a dyno \/ competent tuner.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/products\/drill-tap-for-aux-pump-kit\"\u003eClick here to purchase the drill and tap.\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. The pumps themselves are covered for 90 days from receipt of the shipment.\u003c\/span\u003e\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"LT4 MAP (4-wire 4 bar) \/ GSL392 (255lph)","offer_id":51003539980566,"sku":"DSX-V3AFPK-LT4-392","price":1060.0,"currency_code":"USD","in_stock":true},{"title":"LT4 MAP (4-wire 4 bar) \/ GSL396 (320lph) [+$50]","offer_id":51003540013334,"sku":"DSX-V3AFPK-LT4-396","price":1111.0,"currency_code":"USD","in_stock":true},{"title":"CAN (Plugs into parking brake) \/ GSL392 (255lph)","offer_id":51003540046102,"sku":"DSX-V3AFPK-CAN-392","price":1470.0,"currency_code":"USD","in_stock":true},{"title":"CAN (Plugs into parking brake) \/ GSL396 (320lph) [+$50]","offer_id":51003540078870,"sku":"DSX-V3AFPK-CAN-396","price":1522.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/16_-Camaro_3bb06cee-9112-48a7-8d3e-116a2ba4bf46.jpg?v=1769897888"},{"product_id":"flex-fuel-kit-for-2016-cts-v","title":"DSX Flex Fuel Kit for 2016+ CTS-V","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540111638,"sku":"DSX-V3FFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-03_ab92dc22-1992-4762-aeb9-87e87c7d8290.jpg?v=1769897889"},{"product_id":"copy-of-flex-fuel-kit-for-2014-gm-truck","title":"DSX Flex Fuel Kit for 2014+ GM Truck","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV\/Gen V GM V8 vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cinline\u003e \u003c\/inline\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540144406,"sku":"DSX-14+TRUCKFFK","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-03_a97f29e8-06b1-45bb-920d-11d9c12b96e6.jpg?v=1769897890"},{"product_id":"lsa-idler-relocation-bracket","title":"DSX LSA Idler Relocation Bracket","description":"\u003cp\u003eThis bracket is meant to relocate the lower idler on LSA engines to allow for a larger diameter crank pulley on the blower drive. This bracket is intended to be used with factory bolts and factory idlers, but aftermarket idlers are also able to be used. It is not recommended to use a 50mm idler pulley on the bottom though due to the likelihood of failure from exceeding the rpm limit of the bearings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540177174,"sku":"DSX-LSA-BRACKET","price":95.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/LSA-Idler-Relocation-Bracket---Front_9f38c38f-bdae-483b-a05a-b058930fb9f5.jpg?v=1769897891"},{"product_id":"gm-45-push-connect-coupler","title":"DSX GM 45° Push Connect Coupler","description":"\u003cp\u003e\u003cspan\u003eThese DSX original fittings are made from a solid block of 6061 aluminum and then anodized black and laser engraved. These are very hard to machine due to the unique 45° angle! They make connecting two male GM push connect ends a snap. Unlike other fittings out there that use difficult to deal with backing nuts, this uses stainless steel snap clips inside as well as a double fluorosilicone o-ring seal on each end to provide the easiest installation coupled with leak free operation on even the worst of fluids.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e DSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540209942,"sku":"DSX-45PCC","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/45-Push-Connector-Coupler---Side_31f29e8a-87e7-4f3a-9839-2c6670e4a9e5.jpg?v=1769897891"},{"product_id":"billet-double-bearing-idler-pulley","title":"DSX Billet Double Bearing Idler Pulley","description":"\u003cp\u003eThese idler pullies are made from billet 6061 aluminum and use two SKF 6203 bearings for durability. The rear spacer is included, and these are designed to work with a stock bolt. They are available in two diameters: 100mm and 76mm. Please note the 100mm have been redesigned to accommodate 12-rib LSA systems and will have an excess of unused area towards the front on 8-rib systems. The 76mm is not intended for LSA drive systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"100mm","offer_id":51003540242710,"sku":"DSX-100MM","price":105.43,"currency_code":"USD","in_stock":true},{"title":"76mm","offer_id":51003540275478,"sku":"DSX-76MM","price":100.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/Idler-Pulley-1.jpg?v=1769897892"},{"product_id":"fuel-rail-pressure-sensor-kit","title":"DSX Fuel Rail Pressure Sensor Kit","description":"\u003cp\u003eThis kit is designed to allow the addition of a fuel pressure sensor to the factory rail very easily. The heart of the kit is a bullet tee fitting with a male 4AN branch and run that are both internally threaded to accept a Schrader valve, just like the stock test port on the fuel rail. The other run is threaded to screw directly to a GM fuel pressure sensor (fluorosilicone o-ring included). Included with the kit is a crimped PTFE 4AN hose with one straight and one 90° end which allows you to choose the best orientation for attaching to your rail (and you can choose which port to use on the tee fitting). After removing the factory Schrader valve core, you will connect the hose to the rail, the tee to the hose, and then reinsert the Schrader valve core into the unused 4AN connection on the tee which leaves you with a bleed\/test port after having a sensor hooked up! \u003cstrong\u003eThis will work on any vehicle that has a 4AN test port on the fuel rail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA 8' long pigtail is also included in this kit to allow you to connect 5V (red), signal (blue), and ground (brown).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom options for the wiring are available so you can use this to relocate your pressure reading to the rail itself instead of near the back of the car. If purchased with the nGauge from DSX Tuning, we can build the end of the harness out to plug into the nGauge and pre-program it for the sensor. A 10uF capacitor is recommended when using with the nGauge (included if bought as a combo).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eComplete kit contents:\u003cbr\u003e • GM Fuel Pressure Sensor\u003cbr\u003e • DSX tee fitting\u003cbr\u003e • 2' long 4AN PTFE line (straight one end, 90 other)\u003cbr\u003e • Premade pigtail for sensor\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTransfer (in kPa):\u003c\/p\u003e\n\u003cp\u003eP = V * 175 + 12.5\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eTHE SENSOR READS ABSOLUTE PRESSURE! TO CONVERT TO CONVENTIONAL GAUGE PRESSURE, SUBTRACT THE BAROMETRIC PRESSURE VALUE FROM THE READING.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540341014,"sku":"DSX-FRPTEE","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_01697a02-8c7e-4483-bd66-390f75ef7e9a.jpg?v=1769897894"},{"product_id":"dsx-tuning-lsa-lt4-lower-pulley","title":"DSX Tuning LSA\/LT4 Lower Pulley","description":"\u003cp\u003eThese lower pulleys are compatible with ATI part numbers \u003ca href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/ati-918854-lsa-balancer\"\u003e918854\u003c\/a\u003e and \u003ca href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/ati-918856-lt4-balancer\"\u003e918856\u003c\/a\u003e for the LSA and LT4 (Camaro\/CTS-V only) damper. They are machined from 6061 aluminum and anodized for protection.\u003c\/p\u003e\n\u003cp\u003eThe pulleys are available in three sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e230mm (9.06\") [LSA 15%\/LT4 12%]\u003c\/li\u003e\n\u003cli\u003e235mm (9.25\") [LSA 18%\/LT4 15%]\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca title=\"DSX Idler Relocation Bracket\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/lsa-idler-relocation-bracket\" data-mce-fragment=\"1\"\u003eIDLER RELO BRACKET REQUIRED FOR LSA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e240mm (9.45\") [LSA 20%\/LT4 17%]\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"DSX Idler Relocation Bracket\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/lsa-idler-relocation-bracket\"\u003eIDLER RELO BRACKET REQUIRED FOR LSA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e245mm (9.65\") [LSA 23%\/LT4 20%]\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca title=\"DSX Idler Relocation Bracket\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/lsa-idler-relocation-bracket\" data-mce-fragment=\"1\"\u003eIDLER RELO BRACKET REQUIRED FOR LSA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e250mm (9.84\") [LSA 25%\/LT4 22%]\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"DSX Idler Relocation Bracket\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/lsa-idler-relocation-bracket\"\u003eIDLER RELO BRACKET REQUIRED FOR LSA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote the 9.84 can interfere with the sway bar on extreme suspension geometry events in LT4 ZL1s\/CTS-Vs.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"230mm (9.06\")","offer_id":51003540373782,"sku":"DSX-LSA906","price":164.57,"currency_code":"USD","in_stock":true},{"title":"235mm (9.25\")","offer_id":51003540406550,"sku":"DSX-LSA925","price":167.0,"currency_code":"USD","in_stock":true},{"title":"240mm (9.45\")","offer_id":51003540439318,"sku":"DSX-LSA945","price":169.43,"currency_code":"USD","in_stock":true},{"title":"245mm (9.65\")","offer_id":51003540472086,"sku":"DSX-LSA965","price":171.86,"currency_code":"USD","in_stock":true},{"title":"250mm (9.84\")","offer_id":51003540504854,"sku":"DSX-LSA984","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/LSA906-1_9c7bff0c-4df5-4d89-8b36-795810f63d4f.jpg?v=1769897895"},{"product_id":"dsx-tuning-c7-lt4-lower-pulley","title":"DSX Tuning C7 LT4 Lower Pulley","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003eThese lower pulleys are compatible with ATI part number \u003ca title=\"917315\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/ati-917315-c7-lt4-balancer\"\u003e917315\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the C7 LT4 damper. They are machined from 6061 aluminum and anodized for protection.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSix titanium T45 flat head screws are available as an option for securing to the ATI damper. The 9.84 has been discontinued as an in-stock item, but we are still able to cut them on demand through our \u003ca title=\"C7 LT4 Anysize Pulley\" href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/c7-lt4-anysize-pulley\"\u003eAnysize pulley option\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e The pulleys are available in two sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e230mm (9.06\") [LT4 12%]\u003c\/li\u003e\n\u003cli\u003e235mm (9.25\") [LT4 15%]\u003c\/li\u003e\n\u003cli\u003e240mm (9.45\") [LT4 17%]\u003c\/li\u003e\n\u003cli\u003e245mm (9.65\") [LT4 20%]\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DSX Tuning","offers":[{"title":"230mm (9.06\") \/ Yes","offer_id":51003540537622,"sku":"DSX-C7LT4-230-YES","price":179.14,"currency_code":"USD","in_stock":true},{"title":"230mm (9.06\") \/ No (-$15)","offer_id":51003540570390,"sku":"DSX-C7LT4-230-NO","price":164.57,"currency_code":"USD","in_stock":true},{"title":"235mm (9.25\") \/ Yes","offer_id":51003540603158,"sku":"DSX-C7LT4-235-YES","price":176.71,"currency_code":"USD","in_stock":true},{"title":"235mm (9.25\") \/ No (-$15)","offer_id":51003540635926,"sku":"DSX-C7LT4-235-NO","price":167.0,"currency_code":"USD","in_stock":true},{"title":"240mm (9.45\") \/ Yes","offer_id":51003540668694,"sku":"DSX-C7LT4-240-YES","price":184.0,"currency_code":"USD","in_stock":true},{"title":"240mm (9.45\") \/ No (-$15)","offer_id":51003540701462,"sku":"DSX-C7LT4-240-NO","price":169.43,"currency_code":"USD","in_stock":true},{"title":"245mm (9.65\") \/ Yes","offer_id":51003540734230,"sku":"DSX-C7LT4-245-YES","price":186.43,"currency_code":"USD","in_stock":true},{"title":"245mm (9.65\") \/ No (-$15)","offer_id":51003540766998,"sku":"DSX-C7LT4-245-NO","price":171.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/C7LT4-906-1_d3b1e34b-fa7d-476b-a1ff-ddb8bbdb081a.jpg?v=1769897896"},{"product_id":"lsa-zl1-lid-billet-water-manifold","title":"DSX LSA ZL1 Lid Billet Water Manifold","description":"\u003cp\u003eDesigned and manufactured by DSX Tuning, these replacement water manifolds are intended for the ZL1 LSA supercharger cover. They are made from a single piece of 6061 aluminum and feature dual 12 ORB connections so you can adapt to whatever type of AN connections you may need. The internal orifices are 0.610\" diameter all the way through and machined smooth to allow excellent flow in and out of the intercooler brick. They are anodized black for protection against pitting and a superior appearance.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"No","offer_id":51003540799766,"sku":"DSX-ZL1BWM","price":168.57,"currency_code":"USD","in_stock":true},{"title":"Yes (+$24)","offer_id":51003540832534,"sku":"DSX-ZL1BWM-F","price":191.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/Manifold-3_d3bb1131-50f2-4296-983e-a2cb397b8db4.jpg?v=1769897897"},{"product_id":"flex-fuel-kit-for-2012-2015-camaro-lfx","title":"DSX Flex Fuel Kit for 2012-2015 Camaro LFX","description":"\u003cdiv\u003eThe DSX Tuning flex fuel kit is a plug and play solution to adding flex fuel on GM vehicles. Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup. Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune. This kit features 100% clip together plumbing... There is ZERO need for wrenches!\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eTHIS KIT IS INTENDED TO INSTALL ON THE FUEL LINE WHERE IT COMES UP NEAR THE PASSENGER SIDE STRUT TOWER.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cinline\u003e \u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product. \u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540865302,"sku":"DSX-FLEX-LFX","price":277.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-13_ab9f253b-023f-4ae5-ab16-8c0831dac25b.jpg?v=1769897898"},{"product_id":"dsx-tuning-clearanced-c7-lt4-serpentine-pulley","title":"DSX Tuning Clearanced C7 LT5 Serpentine Pulley","description":"\u003cp\u003eThis pulley replaces the factory plastic pulley on the C7 LT5 serpentine tensioner and is clearanced to allow larger supercharger pulleys.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540898070,"sku":"DSX-C7LTx-PULLEY","price":81.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/11Rip-Tensioner.jpg?v=1769897898"},{"product_id":"titanium-lug-nuts","title":"DSX Titanium Lug Nuts","description":"\u003cp\u003eThese twelve point lug nuts are made from Ti6Al4V titanium. They weigh substantially less than factory steel lug nuts, won't corrode, and won't deform or get stuck in wrenches. These come in M12x1.5 and M14x1.5 sizes with a 60° seat angle. They require a 12-point socket (17mm for M12 and 19mm for M14).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eM12 weight is 16.0g.\u003c\/p\u003e\n\u003cp\u003eM14 weight is 22.7g.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePrice is per lug nut. The use of a very light coating of anti-seize on the threads and slow installation speed is required. Do not use an impact to drive them down and seat the wheel. \u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"M12x1.5","offer_id":51003540930838,"sku":"DSX-TiLugNut-M12","price":28.84,"currency_code":"USD","in_stock":true},{"title":"M14x1.5","offer_id":51003540963606,"sku":"DSX-TiLugNut-M14","price":29.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_b8c905c3-fccb-4c80-a701-7ea42d590810.jpg?v=1769897899"},{"product_id":"cts-v-16an-lsa-coolant-manifold","title":"DSX LSA CTS-V Lid Billet 16AN Water Manifold","description":"\u003cp\u003eThese replacement water manifolds are intended for the CTS-V LSA supercharger cover. They are made from a single piece of 6061 aluminum and feature dual 16AN male connections so you can run 16AN lines without the need for adapter fittings. The outlets are spaced appropriately to prevent any collision of the hex nuts during tightening.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003540996374,"sku":"DSX-OUTLET-LSA","price":124.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_2f6244f6-52fc-4e52-b9bf-2193fe39a07e.jpg?v=1769897900"},{"product_id":"dsx-tuning-lsa-lt4-anysize-lower-pulley","title":"DSX Tuning LSA\/LT4 Anysize Lower Pulley","description":"\u003cp\u003e\u003cspan\u003ePlease note we will only cut these on Thursdays in order to minimize fixture swapping in our machine. Please contact us if you have an urgent need for one. Custom made pulleys are not returnable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese lower pulleys are compatible with ATI part numbers\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/ati-918854-lsa-balancer\"\u003e918854\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/dsxtuning.com\/collections\/supercharger\/products\/ati-918856-lt4-balancer\"\u003e918856\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the LSA and LT4 (Camaro\/CTS-V only) damper. They are machined from 6061 aluminum.\u003c\/p\u003e\n\u003cp\u003eThe pulleys are available in any size for either 8-rib, 10-rib, or 12-rib configuration up to an effective diameter of 10.5\" (about 267mm). These are made 100% in house. Anodizing is available for an extra fee (and may add significant time to delivery). Please choose your rib configuration from the drop down menu, and specify the size of the pulley in the notes when placing your order. We can typically ship within one week of ordering (usually faster)\u003cspan data-mce-fragment=\"1\"\u003e. Returns are not accepted on custom cut pulleys.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOEM LSA diameter is 199.93mm (7.87\").\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOEM LT4 diameter is 204.97mm (8.07\").\u003c\/span\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"8-rib","offer_id":51003541061910,"sku":"DSX-ANYSIZE-8","price":233.43,"currency_code":"USD","in_stock":true},{"title":"10-rib","offer_id":51003541094678,"sku":"DSX-ANYSIZE-10","price":262.57,"currency_code":"USD","in_stock":true},{"title":"12-rib","offer_id":51003541127446,"sku":"DSX-ANYSIZE-12","price":286.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_ac19ef6a-41b3-4b62-abac-e9ddeabae6a8.jpg?v=1769897902"},{"product_id":"lf4-flex-fuel-kit","title":"DSX Flex Fuel Kit for LF4","description":"\u003cdiv\u003e\u003cspan\u003eThe DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on GM vehicles.  Use these kits to add the ability to run anywhere from straight gasoline to straight ethanol as well as reveal the true power potential of your setup.  Forced induction scenarios especially benefit from the use of ethanol, and these allow you to seamlessly switch between gasoline and ethanol without having to monitor your fuel content or reflash your tune.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cinline\u003e \u003c\/inline\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cinline\u003eThis kit uses:\u003c\/inline\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cinline\u003eGenuine GM Flex Fuel sensor\u003c\/inline\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlumbing kit made of corrosion resistant materials to ease installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlug and Play wiring harness made with OEM connectors and terminals crimped with OEM tooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDSX Tuning 3D printed fuel line disconnect\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cinline\u003e \u003c\/inline\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/dsxtuning.com\/collections\/gauges\/products\/p3-v3-obd2-cadillac-ats-gauge-2016-2019?variant=40177762664528\"\u003eLooking for an ethanol display? Click here!\u003c\/a\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\u003cinline\u003e\u003cb\u003ePLEASE NOTE:\u003c\/b\u003e \u003cspan\u003eIt is possible to install this kit without tuning, but you will not gain the ability to switch fuels until the functionality is activated in the ECM through\u003c\/span\u003e \u003ca href=\"http:\/\/www.hptuners.com\/index.php\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHP Tuners\u003c\/a\u003e or \u003ca href=\"http:\/\/www.efilive.com\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEFILive\u003c\/a\u003e.\u003c\/inline\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cspan\u003eDSX manufactured components are covered against defects in materials and workmanship for the life of the product.  \u003c\/span\u003e\u003c\/span\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cspan\u003e GM sensors are warrantied for 90 days. \u003c\/span\u003e\n\u003c\/div\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003541160214,"sku":"DSX-FLEX-LF4","price":328.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/DSX-FF-12_08835070-1abf-43db-b28f-0ec184fbe44a.jpg?v=1769897904"},{"product_id":"eaton-solid-isolator-lsa-ls9","title":"DSX Eaton solid isolator - LSA\/LS9","description":"\u003cp\u003eThe supercharger isolator is part of the supercharger drive assembly and is located in the supercharger snout.  The OEM isolator installed at the factory contains a spring mechanism and is notorious for noise and a short service life.  The spring in the original isolator wears a groove on the supercharger shaft, creating debris that will eventually cause the shaft seal to fail.  This replacement coupler is manufactured by the Eaton Corporation for GM, and as an OEM part that installs as a direct replacement for the original.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003541192982,"sku":"DSX-EATONSOLID","price":87.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0930\/0878\/9782\/files\/image_07d34b73-12a6-421c-be09-9b09f648da11.jpg?v=1769897905"},{"product_id":"lt4-hpfp-conversion-harness","title":"DSX LT4 HPFP Conversion Harness","description":"\u003cp\u003eThis jumper allows the use of the older LT4 HPFP with a Bosch connector on newer GM vehicles that require a Molex connector.\u003c\/p\u003e","brand":"DSX Tuning","offers":[{"title":"Default Title","offer_id":51003541258518,"sku":"DSX-LT4HPFPHARNESS","price":71.43,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.cspracing.com\/collections\/dsx-tuning.oembed","provider":"Complete Street Performance","version":"1.0","type":"link"}